3" Exhaust

[IronFreak]

True, im not sure what his setup is, but on mine 3" is about as small as you want to be.

[King Mufasa]

depends on power

[IronFreak]

Bigger exhoust doesn't always mean better.

When there is a turbo involved...yes it does.

[jaywood]

I got all of my exhaust stuff from summit (minus the mandrel bends which I sourced on eBay) I built this on jackstands with the mig welder on the other side of building.





Here's the downpipe



2.5" --- 3" adapter (bought the 2.5" downpipe and didn't feel like building a new one at the time)



Used lots of sharpie marks, tacked with the mig, test fit, tacked some more.





I used a flex pipe (you NEED one of these) and a glass pack from summit





Here it is, all tacked with the Summit Turbo Muffler at the rear.



Test fitting



Painted



Here's one of the hangars I made. It worked, but not too well. I will be doing it differently next time around



Don't forget about the bung for the wideband!!



All done, minus the tips. You can kind of see how low the 3" exhaust will be.



Here are some sound clips. Forget the exhaust leak in the first video.... :(



Here's another in car...I did not get on it at all, it was one of the first test drives!

[Victell]

Why not make it out of aluminum tubing? Could save a bunch of weight.

[King Mufasa]

Bigger exhoust doesn't always mean better.

[jaywood]

I had a 3" on my turbo car that I'll be reusing when I put the new system on. I'll post pics later. I used misc mandrel bends from eBay....worked great.

[DrtyE30]

If youre lowered you should look at doing an oval pipe. My m42 car scrapes the exhaust everywhere and it is beyond annoying. Ive destroyed a few poorly placed v bands so i ended up junking them and welding it all. When i redo it im going to do oval or maybe dual pipes. but then theres all that weight that will be added

When I had my m42 in this 318 it scraped, when I put the m20 in and re-did the exhaust it scraped.....Just bought Ground control coilovers and plan on going lower so you probably very right on going oval. I could always just weld diamond plate up and down the exhaust and just spark ever where!!

[MF DOOM]

If youre lowered you should look at doing an oval pipe. My m42 car scrapes the exhaust everywhere and it is beyond annoying. Ive destroyed a few poorly placed v bands so i ended up junking them and welding it all. When i redo it im going to do oval or maybe dual pipes. but then theres all that weight that will be added

[DrtyE30]

Magnaflow has such a good tone

My favorite! I have one on there now

http://www.magnaflow.com/02product/displayapplications.asp?partnumber=14815

Sounded better on my m42 though!

[IronFreak]

Magnaflow has such a good tone

[DrtyE30]

http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=11136

Digging this muffler HARD!!

[IronFreak]

yeah, and for that price its hard to pass up.

[DrtyE30]

hahaha, I won't do the expanded. Mine will all be welded with v-clamps.

Nice I was thinking the same thing, the exhaust I have now is 2.50 and one solid pipe all the way back. Just something to get me by. I mine as well make it count this time and do it right !!

[IronFreak]

hahaha, I won't do the expanded. Mine will all be welded with v-clamps.