3" Exhaust

[DrtyE30]

^^^Nice. Being Midwest their shipping is about half as much as the first place I posted.

And the 3" expanded kit is 130.49 over 131.45 on the other website.... the savings are making me weak in the knees!

[IronFreak]

^^^Nice. Being Midwest their shipping is about half as much as the first place I posted.

[DrtyE30]

I've bought a lot of stuff from http://www.mandrelbendingsolutions.com

They're on the east coast so stuff gets to Mass in two days.

Wow that's some good pricing!

[FredK]

I've bought a lot of stuff from http://www.mandrelbendingsolutions.com

They're on the east coast so stuff gets to Mass in two days.

[DrtyE30]

Check this place out as well...

http://www.siliconeintakes.com/index...3e81bac07828ae

Bought a bunch of stuff off them before, really dope place!

[IronFreak]

Check this place out as well...

http://www.siliconeintakes.com/index.php?osCsid=c2c8808a3f47812f4a3e81bac07828ae

[DrtyE30]

Most exhaust is 16 gauge or thinner. 16 gauge is not particularly thin for exhaust. The weight adds up quickly especially on a 3.0" system.

Truth, didn't think about that!

[DrtyE30]

They do have some nice stuff for cheap, just wasn't sure if it was going to work. It's cheap enough that I wouldn't mine buying it to check it out.

[FredK]

Most exhaust is 16 gauge or thinner. 16 gauge is not particularly thin for exhaust. The weight adds up quickly especially on a 3.0" system.

[Northern]

16ga is 0.065". Doesnt seem bad. Im liking their silicon elbows/reducer elbows and vbands as well.

[IronFreak]

They have different sizes they sell. Look through their site. Most exhaust that size is either 14-16 gauge material.

[DrtyE30]

Well I'm going to be doing the same on my turbo build. I have been looking at this place. They have pipe kits you can buy. I was looking at this one.

http://www.mandrel-bends.com/catalog...te-bk-867.html

Is that exhaust grade? It looks like inter cooler piping. It says 16 gauge which is really thin. Maybe I'm wrong, but something about it doesn't look right.

[IronFreak]

Well I'm going to be doing the same on my turbo build. I have been looking at this place. They have pipe kits you can buy. I was looking at this one.

http://www.mandrel-bends.com/catalog/builder-kits-33/ultimate-builder-kit-111/3-00-od-4-00-radius-16-gauge-mild-steel-ultimate-bk-867.html

[DrtyE30]

I'm looking into doing 3" exhaust all the way back on my turbo build. Any suggestions on a mark up for it. Also muffler options?