External wastegate turbo suggestions?

[Batz]

So, im fairly new to turbos and FI in general. So if you guys will see a lot of stupid questions from me on this forum in the future couple month, i apologize.


Anyways, i cant seem to find a turbo. I want something with external wastegate, spools fast, and cheap. (Probably seems unrealistic, huh?) I have been thinking about getting holset h1c, but its a big turbo and ill have pretty big lag, which i dont want. Hx35 are only internal wastegated i believe? so are hy35.? Garrett are expensive.

while doing my reseach i stumped upon this site, it has some turbos, some fast spooling external wastegate turbos, but the prices seem a bit suspicion. so i assumed they are bad? http://www.speedyracer.com/turbochar...d-Turbocharger

[Specialedbob]

hx35w has an internal wastegate. hx35 does not have an internal wastegate.

[Batz]

Oh really? will be looking for one with no wastegate then. It's just that the only ones I saw for sale on eBay and etc. were internal so I figured... Thanks a lot!

[DirtyMaxTJ]

A lot of people on this site have had good luck finding them on cummins forums. I would say search there.

[Batz]

yeah, i realized that ebay doesnt do much unless you get lucky, so ill probably search on truck forums and maybe even at junk yards... who knows..

[GunMetalGrey]

Aren't the internal gates on those set for 28+ psi? You can't use a boost controller to lower the spring pressure.
Also, I am not sure which engine you have, but I don't think you will fit a turbo with an internal wastegate on a 24v. I had to shave the wastegate brackets off of my HX35 just to get it to clear the valve cover.

[DER E30]

Aren't the internal gates on those set for 28+ psi? You can't use a boost controller to lower the spring pressure.
Also, I am not sure which engine you have, but I don't think you will fit a turbo with an internal wastegate on a 24v. I had to shave the wastegate brackets off of my HX35 just to get it to clear the valve cover.

Just gonna have to run 28+PSI!

[GunMetalGrey]

94 17 psi HX35W 12
95-98 17 psi HX35W 12
96-98 23 psi HX35W 12
98-00 ETC 20.8 psi HX35W 12
01 ETC 23 psi HX35W 12
01 ETH 26 psi HX35W 12

My number was a tad off

[nomansland92]

I have a brand new hx35 with no wastegate, im thinking about selling it to up grade to ball bearing. If your interested I can try to find the one I want then I can sell this one.

[Batz]

Pmed

[BMWManiac]

What size is your Hx35? CM^12?