Okay guess its getting to the point on my build where mainfold is getting needed. Any recommendations of a good not over priced mainfold. Or anyone have one forsale?;)
Announcement
Collapse
No announcement yet.
E30 M52b28 turbo build
Collapse
X
-
From research, they're tricky to make/do correctly due to the wider DOHC m50. If I were in your boat, I'd save up the $500 to get a properly made one by rapid spool which has been suggested by many members. Worry free, quality product.
I'm about 50% done my turbo m20 build/install and what I've learnt is getting quality products off the bat, saves a lot of headache and most of the time money in the end. Go with the one listed below!
I'm sorry I can't provide first hand experience with it, doesn't seem like many people are wanting to or able to provide much assistance in this topic as my question below yours has gone days without any help.
2016 F-150
1987 Royalblau 325es B25 turbocharged
Build thread here: http://www.r3vlimited.com/board/showthread.php?t=405594
-
Ahh nice, good luck, hopefully you can find one!2016 F-150
1987 Royalblau 325es B25 turbocharged
Build thread here: http://www.r3vlimited.com/board/showthread.php?t=405594
Comment
-
Originally posted by E30-Ellerman View PostFrom research, they're tricky to make/do correctly due to the wider DOHC m50. If I were in your boat, I'd save up the $500 to get a properly made one by rapid spool which has been suggested by many members. Worry free, quality product.
I'm about 50% done my turbo m20 build/install and what I've learnt is getting quality products off the bat, saves a lot of headache and most of the time money in the end. Go with the one listed below!
I'm sorry I can't provide first hand experience with it, doesn't seem like many people are wanting to or able to provide much assistance in this topic as my question below yours has gone days without any help.
http://www.rapidspoolindustries.com/ordering
We've added the E36 top mount to our line up and will be adding some more turbo accessories.Need a Turbo manifold? We have them in stock- Click here---> http://rapidspoolindustries.com/
____________________________
E-mail Panayiotisx2@gmail.com
Dyno vid http://www.youtube.com/watch?v=C7aM7..._order&list=UL
Comment
-
Check out my build thread in my Sig. All done with rsi manifoldRHD OBD2 M50b25 turbo build thread:
http://www.r3vlimited.com/board/showthread.php?t=384800
Comment
-
Originally posted by JOMARO View Postbe ware that the 24V e30 RSI mani , creeps boostRHD OBD2 M50b25 turbo build thread:
http://www.r3vlimited.com/board/showthread.php?t=384800
Comment
-
Originally posted by haaken675 View PostHow would boost creep from a manifold? Maybe if your wastegate isn't working properly I could see that...
That said, you could block off the manifold's WG port and install the wastegate on the turbine housing and that would solve everything, but not everyone wants to cut/weld their shiny new turbine housing, and then possibly do it again if they change turbos.
at 12psi on an S257, I haven't had creep yet. If that changes, I'll probably do this mod.Last edited by Northern; 09-20-2017, 03:56 PM.Originally posted by priapismMy girl don't know shit, but she bakes a mean cupcake.Originally posted by shamesonUsually it's best not to know how much money you have into your e30
Comment
Comment