F/I Eaton M90 Superchager

[TDE30]

Tell you what, if you want it to handle better: replace the trunk with one that's not fucked up and DON'T put a spoiler on it, Take of the graphics (they're causing wind resistance,) and return everything else to stock as well. Next, sell the car to someone who doesn't drive like a retard on public roads but instead, hones their skills at track days or AutoX's and I can 100% ASSURE you that your car will be faster and handle better.

[FLUTE007]

is this thread serious or a joke?

[JUMPNYC]

You should install some speed holes in it! Much better than a big ol wing!

Speed Holes:
Holes you put in the hood of your car with a pickaxe to (supposedly) make it go faster. These holes may also be installed via sniper fire.


Ned: Whatcha diddely-doin', neighbor?

Homer: Aw, putting speed holes in my car. Makes it go faster.

Ned: Is that so? Well, gee, maybe the old Flanders-mobile could use some

check out a awesome speed hole installation here!

http://www.youtube.com/watch?v=bx_dyveYyMQ

[dkerley03]

Project Delay

There has been some delay in the project, fuel leaks! I developed a fuel leaks under the car on the drivers side in front of the rear wheel. It turned out to be a partially clogged fuel filter and a twenty year old dry rotted fuel line. We replaced the fuel line and the filter and the car is running even better! The engine is much more responsive to the throttle and accelerates quicker.

I am preparing to replace the passenger side rear axle and install M3 solid offset control arm bushings, due to age and wear. After these maintenance items are finished, I will get back to the supercharger install.

Thank you all for you kind considerate comments in the mean time

[Fidhle007]

There has been some delay in the project, fuel leaks! I developed a fuel leaks under the car on the drivers side in front of the rear wheel. It turned out to be a partially clogged fuel filter and a twenty year old dry rotted fuel line. We replaced the fuel line and the filter and the car is running even better! The engine is much more responsive to the throttle and accelerates quicker.

I am preparing to replace the passenger side rear axle and install M3 solid offset control arm bushings, due to age and wear. After these maintenance items are finished, I will get back to the supercharger install.

Thank you all for you kind considerate comments in the mean time

Take that wing off yet? Peel off those graphics? No?

Then leave.

[e30s52]

this thread and his car are both EPIC failure!

[e30rcr]

I'd just like to say that the original poster is responding very well and with 50x the maturity of most r3vlimited members to this bullshit. Therefore, my vote is to lay the fuck off. Let him build or mod his car how he wants.

To everyone who is hating on this guy, get a fucking life.

[Fidhle007]

I'd just like to say that the original poster is responding very well and with 50x the maturity of most r3vlimited members to this bullshit. Therefore, my vote is to lay the fuck off. Let him build or mod his car how he wants.

To everyone who is hating on this guy, get a fucking life.

[CorvallisBMW]

I'd just like to say that the original poster is responding very well and with 50x the maturity of most r3vlimited members to this bullshit. Therefore, my vote is to lay the fuck off. Let him build or mod his car how he wants.

To everyone who is hating on this guy, get a fucking life.

You mistake maturity for lack of comprehension

[dkerley03]

Graphics are gone! Wing Stays

Graphics are gone! Wing stays and the Super Charger is still going to go on. The graphics were getting ragged, I worked off an on for two weeks to remove them. It was fun while they lasted! I will post some updated pictures soon.

[aintnothang]

Yay no graphics...now about that wing....but hey, its your car.

[CorvallisBMW]

Graphics are gone! Wing stays and the Super Charger is still going to go on. The graphics were getting ragged, I worked off an on for two weeks to remove them. It was fun while they lasted! I will post some updated pictures soon.

You do realize the wing is slowing you down, right? And that you'll never make any downforce with it, even at 100mph. Those things aren't engineered to provide any decent kind of fluid flow. They're just some aluminum siding bolted together in China and sold at Pepboys. It's like walking around on crutches when you don't have a borken leg. You're slow and look like a retard.

[Danny]

Hey I'm in someone signature!

[Fidhle007]

...It's like walking around on crutches when you don't have a broken leg. You're slow and look like a retard.

A+ on that one, I lol'd.

[Fidhle007]

Hey I'm in someone signature!

Hey, now we're BOTH postwhoring! High five! :D