I like making stuff ( short runner intake ) for the deuce

[RobE30]

Uber cool! Nice work

[Good & Tight]

Pulled out of my ass design.:D

Ah that's my favorite design I always use it. :)

Looks really good!!

[Pinepig]

I should be making some progress on it this next week ( meaning in and complete ) , I've been sick as a dog since the last update, felt pretty good today and got the duel intercooler cores mounted in the 75 ( sorry no pics yet ) so I can finish fitting the TB piece now.

I'll be trash tomorrow, worked like a dog all day on the damn thing and I have to stay up tonight for the F1 race.

[bmwguy87]

That looks awsome can I get one for an M52?

[Ray Smoodiver]

Looks great mate! Very similar to the 666fab M42 manifold.

[Pinepig]

Looks great mate! Very similar to the 666fab M42 manifold.

I didn't even know he made them, I hadn't look at his page in a while.

I know why he asks what he does for them.

[mafoose]

I know it's a little late, but do can you, or anyone you know, run a CFD analysis of your design?

In a Zcar forum I participate in, one guy ran an analysis on a similar design and it had a huge swirl in the center leaning out 2 cylinders quite dangerously.

[Bmwmotorm52]

nice job..

[Pinepig]

Finally got it done, needs a bunch of cleanup work but it's in and runs ( hey it's my daily).

[Jean]

Nice job! Maybe you should teach me how to do that so I can make a "draft" version for the b35 lol

Are you still using the same throttle body or did you switch to something else with your adapter plate?

[Pinepig]

Nice job! Maybe you should teach me how to do that so I can make a "draft" version for the b35 lol

Are you still using the same throttle body or did you switch to something else with your adapter plate?

Same 57mm one off the Honda Prelude.

[Lurker27]

I know it's a little late, but do can you, or anyone you know, run a CFD analysis of your design?

In a Zcar forum I participate in, one guy ran an analysis on a similar design and it had a huge swirl in the center leaning out 2 cylinders quite dangerously.

I can run it in SW floworks if given the specifications. Partially dividing the plenum may not be a terrible idea. It can be hard to simulate the discrete nature of the actual cylinders sucking air, though.

[eta]

I wonder what the resonant frequency of the system will be. All you need to know is chamber volume, runner length and runner area and the sum is simple from there.

I do like the work and I hope it does what you want.

[Good & Tight]

That looks really nice!!! Notice a difference in power?

[maximumangle]

wicked!! nice job on the fab! i am very curious to see what it flows