I had an injector leak fuel on the intake. I replaced all the O-rings, same one still leaks. Pulled it all apart again assuming I damaged the new O-ring...all good. Reassembled, still leaking, seems to be leaking at the bottom of the body of the injector??? I had an old set of injectors laying around that I installed. No leaks, but it's hard to start cold. I'm guessing the old injectors are leaking down when parked. After all, I replaced them for some reason several years ago.
Looking at our various parts suppliers there seems to be a brand "GB Remanufacturing" that most of the sites seem to carry with various core charges.
Any experience with "GB Remanufacturing" injectors?
Looking at our various parts suppliers there seems to be a brand "GB Remanufacturing" that most of the sites seem to carry with various core charges.
Any experience with "GB Remanufacturing" injectors?