valve springs

[BMWkid91]

Just wondering i have an e head now ik that it has flimsy valve springs its it posible if i put stiffer springs like i ones in will it be more like and i head or just a retro e ?

[SkinnyVT]

at a whopping 4500rpm you aren't going to get valve float, there will be zero performance gain from stiffer valve springs in an 'e' head.

[SmokeE30]

yea what he said, if you really wanted too you could swap in some i springs into it but there would be no point because you wont be spinning that little e cam around fast enough to need them. save money for an whole 885 head swap.

[BMWkid91]

well no shit thank you captian obvious i was going to swap the cam along with it

[619E30]

well no shit thank you captian obvious i was going to swap the cam along with it

Haha

[BMWkid91]

just trying to find the easyest way out of removing the head and puttting the i on and ect if i could just throw the cam in valve spring and ecu with interface in and play around with it
if needed to yah some on have the supplies to make a seta

[Adrian_Visser]

just trying to find the easyest way out of removing the head and puttting the i on and ect if i could just throw the cam in valve spring and ecu with interface in and play around with it
if needed to yah some on have the supplies to make a seta

That post makes my head hurt, try using some goddamn punctuation man. Do some more reading on this subject and you will see that putting the I cam in the e head won't work. The e cam has fewer bearing journals than the I cam.

[SkinnyVT]

That post makes my head hurt, try using some goddamn punctuation man. Do some more reading on this subject and you will see that putting the I cam in the e head won't work. The e cam has fewer bearing journals than the I cam.

nah, just let him throw the 'i' cam in the 'e' head, I'm sure "captain obvious" will show up in time to let him know that he is a retard.

[BMWkid91]

well if want for me knowing this information in the first place then ik

[straight6pwr]

well if want for me knowing this information in the first place then ik

english first, then tech talk.

[nando]

That post makes my head hurt, try using some goddamn punctuation man. Do some more reading on this subject and you will see that putting the I cam in the e head won't work. The e cam has fewer bearing journals than the I cam.

it will work if you drill 3 more holes for the bearings. Totally not a big deal.

Not sure about drilling them with the head on the car though..

[MR 325]

I was going to reply with useful info.

But you can't speak English and you're a dick.

[hotballs]

They have smart phones now days. You don't have to use that old T9 text function anymore.