Where do these seals go? Need to install soon..

[rcfanatic]

Hey guys,

I found a few seals in the victor reinz gasket set that I'm not sure where they go or if I need them. Can someone please identify these for me? I'm trying to get the car running today so if you know please don't hesitate to respond. Thanks!

[jlevie]

Have no scale for reference it is a little hard to tell, but the four white o-rings could be for the oil cooler hoses and the two large black o-rings could be for the oil return tube.

[rcfanatic]

Thanks for the fast reply Jim. I have an '86 so no oil cooler. Any ideas about the small black one? Guitar pick included for reference

[nando]

just make sure there are seals where they need to be, there are frequently extra/unused seals in gasket kits since they are generic and cover many different M20s.

[rcfanatic]

just make sure there are seals where they need to be, there are frequently extra/unused seals in gasket kits since they are generic and cover many different M20s.

OK, as far as I can tell there are but just wanted to be on the safe side

[lateracer]

little one looks like an injector seal

[nando]

it looks like it but it's not, the VR gasket set doesn't come with injector seals.

[jlevie]

just make sure there are seals where they need to be, there are frequently extra/unused seals in gasket kits since they are generic and cover many different m20s.

+1

[SkinnyVT]

small black one could be for the FPR, I agree with the large black ones being for the oil return tube from the IM to the crankcase.