Bought a LOT of parts, need ID help

[JCarp90]

I'll take 38. PM?

[Rc 415]

Thanks for the info! I paid 650 for the lot plus other odds and ends

[nando]

you lucked out on the MM head! I don't know what you paid for all that stuff, but the head alone was probably worth it..

FYI -

B25 cranks (M20, M50, etc) 75mm
eta 81mm
M52B28 84mm
S50B30 86mm
S52B32, M54B30 89.6mm

[slammin.e28]

No info comes up on the crankshaft when I google it.

You probably used the casting #.

[Rc 415]

I told you on the bimmerest that the head looks like it might be a MM head, not that it definitely is ;)

You will do much better to match that head to 2.5 or seta pistons, not sure how well the chamber swirl machining will have an effect on dished pistons.

I contacted mm and they verified, it's a sport head. Thanks for the insight. Also I'm going with custom pistons and using the 135mm m3 rods. Found out the crank is a e36/e46 325 75 millimeter stroke, going to use the stock 81mm crank or try and find a 86mm 328i crank

[sweet6e30]

screw you on the e30 parts gold mine find!

[ForcedFirebird]

I told you on the bimmerest that the head looks like it might be a MM head, not that it definitely is ;)

You will do much better to match that head to 2.5 or seta pistons, not sure how well the chamber swirl machining will have an effect on dished pistons.

[bernzpeed]

Let me know if you have other parts you might need.

[hotballs]

That is an e36 3.2 LTL rack. The black manifold is 325i intake/TB/Fuel Rail, injectors could be anything.

Take a larger picture of the crank, I'm just guessing 2.7 crank.


I'll take the 885 head.

How much did you get the whole lot for?

[der affe]

you have an m tech 1 wing for either an e30 or e28. that white plastic thing fits inside the inner edge.

now give me the head for identifying that for you.

[Rc 415]

I'm really not selling anything guys

[StereoInstaller1]

I found out its a metric mechanic head, and I will be using it on the 2.7 pictured above that I am tearing apart to rebuild.

It will not work, sell it to me.

[Rc 415]

i'll take that big heavy metal block looking thingy.

if you dont know what it is, you definitely dont know how to use it.

I found out its a metric mechanic head, and I will be using it on the 2.7 pictured above that I am tearing apart to rebuild.

[Kershaw]

i'll take that big heavy metal block looking thingy.

if you dont know what it is, you definitely dont know how to use it.

[Rc 415]

No info comes up on the crankshaft when I google it. Some person on craigslist wanting their garage cleaned out.