Announcement

Collapse
No announcement yet.

overheated. Now runs kinda rough. Thoughts?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    overheated. Now runs kinda rough. Thoughts?

    spun into a tire wall but no damage. Somehow the upper coolant hose sprung a leak. Fixed it real fast, topped up the coolant and went back out.

    I've got the car back from the track but it idles kinda rough now and hesitates to rev. Drives fine. It's just the on throttle response is kinda meh and the engine shakes like a mofo. Any thoughts as to what could be wrong?

    Status: HG repair. 488wtq though!

    #2
    The impact with the tire wall may have created an intake leak. Also take a critical look at the motor and transmission mounts.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment


      #3
      When i had a broken rocker arm, I had the same thing going on. May have broke from the overheating.
      87 325is

      Comment


        #4
        compression is 150/160/150/140/155. Of course, now I realize I forgot a cylinder...

        Every cylinder has spark. When I pull each wire the car def idles differently. The car does sound like it's missing on one cylinder.

        I'll finish the comp check tomorrow, it'll show if I have a broken rocker arm. That and I'll yank the valve cover.

        Status: HG repair. 488wtq though!

        Comment


          #5
          depending pn the degree of the overheat, you may have lost a head gasket. damn finiky M20's
          I saved 15% on my Bimmer parts by switching to ...



          Comment


            #6
            All the rockers are in tact. I don't think the HG went. no oil in coolant or coolant in oil. *shrugs* wtf?

            Status: HG repair. 488wtq though!

            Comment


              #7
              just because you don't have mixed fluids doesn't mean you don't have a blown head gasket.

              Comment


                #8
                Originally posted by Vtec?lol View Post
                just because you don't have mixed fluids doesn't mean you don't have a blown head gasket.
                Dude, you're so right. I should just do the HG.

                Status: HG repair. 488wtq though!

                Comment


                  #9
                  Originally posted by shiboujin View Post
                  Dude, you're so right. I should just do the HG.
                  This is the shit I don't get. You make a thread asking for help, and then get all butthurt and sarcastic when you don't hear what you want to hear. If something irks you, ignore it and move on.

                  He is absolutely correct in saying that a blown HG does not necessarily mean you will get mixed fluids. If it's an external leak (cylinder to atmosphere) you still lose compression and it will run rough.

                  Have you checked for vacuum leaks yet?
                  Originally posted by george graves
                  If people keep quoting me in their sig, I'm going to burn this motherfucker down.

                  Comment


                    #10
                    I'm not butt hurt. The statement does me no good. I want to check everything before assuming it's the head gasket. There was no extra pressure in the cooling system, no loss of oil or coolant so all signs point to it not being the HG. With an engine running as rough as mine was, there would have to be something getting into something where it shouldn't be.

                    Status: HG repair. 488wtq though!

                    Comment


                      #11
                      So are you going to check for vacuum leaks or not?
                      Originally posted by george graves
                      If people keep quoting me in their sig, I'm going to burn this motherfucker down.

                      Comment


                        #12
                        cyl 5 had no spark. it was a bad dist cap. Even though I only had it for less than a year.

                        Status: HG repair. 488wtq though!

                        Comment


                          #13
                          Originally posted by shiboujin View Post
                          cyl 5 had no spark. it was a bad dist cap. Even though I only had it for less than a year.
                          Glad to hear you got it taken care of.
                          Originally posted by george graves
                          If people keep quoting me in their sig, I'm going to burn this motherfucker down.

                          Comment


                            #14
                            lol, I wasn't suggesting that it was your headgasket.

                            Comment

                            Working...
                            X