Fuel Injector Cleaning

[StereoInstaller1]

The big improvements are between cold start smoothness and fuel economy. The butt dyno is hard to measure. Out of 6 injectors, usually 2 under perform. What happens is that they are a little lean on those 2 cylinders do the computer compensate by richening up the mixture on the bank of cylinders (cyl 1,2,3 or cyll 4,5,6).

To avoid confusion, my price is $10 per injector and $5 for shipping for all of them. 6 cylinder would be $65. My machines ultrasonically cleans the, backflowed to any particles internally in the injector, and tested to flow within 2% of each other.

I think this should be in your sig.

[dano670]

I think this should be in your sig.

I will work on that. Here is a set I did for "Laken" on this forum. These had to be the dirtiest set of injectors I have seen. I had to swap one of his from my spares to complete his set because one injector was not performing up to par.

[dano670]

Bump, my website has been updated.

https://www.danoperformance.com