If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The big improvements are between cold start smoothness and fuel economy. The butt dyno is hard to measure. Out of 6 injectors, usually 2 under perform. What happens is that they are a little lean on those 2 cylinders do the computer compensate by richening up the mixture on the bank of cylinders (cyl 1,2,3 or cyll 4,5,6).
To avoid confusion, my price is $10 per injector and $5 for shipping for all of them. 6 cylinder would be $65. My machines ultrasonically cleans the, backflowed to any particles internally in the injector, and tested to flow within 2% of each other.
I think this should be in your sig.
Closing SOON!
"LAST CHANCE FOR G.A.S." DEAL IS ON NOW
Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398
I will work on that. Here is a set I did for "Laken" on this forum. These had to be the dirtiest set of injectors I have seen. I had to swap one of his from my spares to complete his set because one injector was not performing up to par.
Comment