Ebay chip. (not a question thread)

[5Toes]

Any updates?

[Exodus_2pt0]

Not yet :(

[bowtie2bimmer]

Are you driving your car around in the mean time? Your ecu will adapt to the new injectors so that would be key to have a proper "baseline" pull

[Exodus_2pt0]

Are you driving your car around in the mean time? Your ecu will adapt to the new injectors so that would be key to have a proper "baseline" pull

Yea I've put a few hundred miles on it. With the shop just starting out we don't have a ton of extra cash. Should be able to have something at the end of the month after the bills are paid.

Stay tuned, I apologize for the delay.

[Northern]

So with a chip, you can still run the 17 or 19 4-pintle e36 injectors? That's something I was unsure of before.

[bowtie2bimmer]

you can run 17/19 with any chip or stock as the ecu is adaptable.

However certain legit chip manufacturers actually make a specific tune for the larger injectors (i.e. MarkD)

[Vivek]

Butt dyne maybe..?

[custom e30]

dude, with out doing the injectors and dyno, i put a chip in my ar and wow, i seen a good difference...u will be happy no matter what

[bowtie2bimmer]

dude, with out doing the injectors and dyno, i put a chip in my ar and wow, i seen a good difference...u will be happy no matter what

But do you have the numbers to back it up

[Exodus_2pt0]

But do you have the numbers to back it up

Soon, we either will, or won't. Dyno has been put on the back burner but I will post up as soon as it happens. I haven't forgotten!

[5Toes]

bump

[Vivek]

Been a bit over a month...still nothing man?

[AlpineM325]

I purchases the same ebay chip as the op, but im having problems with it. My idle bounces With the chip installed. Bounces worse in closed loop but still bounces in open look. Anyone else have this problem?

[jink0619]

^ yes I have the same problem, it also dies at idle sometimes :(

[MaksV]

That means you are not reading anything of the o2 sensor, and the tune is designed to compensate off that map.

Also the e30/pre96 e34/6 dme's do not "adapt" there is no coding for looking at values and making adjustments from them. there is simply a series of maps with AFR ect, that it reads from based on the conditions.