Announcement

Collapse
No announcement yet.

E36 MAF conversion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    E36 MAF conversion

    OK, so i have a e36 MAF i just picked up out of a 325i and i was wanting to change my AFM to the MAF. I currently have the miller war chip in my e30 in a bosch 173 and was wondering if anyone could give me some info on how to wire this bad boy in.
    Stroked out and poked out


    #2
    look for my Volvo MAF thread for some tips.
    CHEAP REBUILT INJECTORS




    Need Quality Brakes? BimmerBrakes has it!
    For anything Else go with BluntTech!

    Comment


      #3
      I don't think that'll work. The WAR Chip (or the software) is designed to operate with the MAFs that Miller sells. Not all MAFs are the same and their output is not linear, each has a characteristic transfer function that maps air mass to output voltage.
      Try posting this in the tuning section and you might get a reply from Brody at Miller.

      Comment


        #4
        Castros sells a tune for the M50 MAF but you'll have to ditch the WAR chip to run it.
        BimmerHeads
        Classic BMW Specialists
        Santa Clarita, CA

        www.BimmerHeads.com

        Comment


          #5
          Screw Brody I hate that turd. And I think I'm just going to try it though just for fun. I just need to know the schematics for the e30s afm plug. It's not its going to make my blow up or light on fire
          Stroked out and poked out

          Comment


            #6
            Do an m50 wiring (ecu, maf, coils, etc..)

            You'll enjoy it


            M20B28 Turbo

            My Build Thread

            http://www.r3vlimited.com/board/showthread.php?t=255839

            Comment


              #7
              It's not going to work.
              Build thread

              Bimmerlabs

              Comment


                #8
                well i have an m54b30 and an m52b28 sitting in my garage but i just need the little bit extra to get the m54 going
                Stroked out and poked out

                Comment


                  #9
                  I just did mine it is very easy, if you want to call me I will walk you through the proscess.
                  PM for my phone number
                  Barry

                  Comment

                  Working...
                  X