E36 MAF conversion

[Tyler325i]

OK, so i have a e36 MAF i just picked up out of a 325i and i was wanting to change my AFM to the MAF. I currently have the miller war chip in my e30 in a bosch 173 and was wondering if anyone could give me some info on how to wire this bad boy in.

[MaksV]

look for my Volvo MAF thread for some tips.

[E30-325iS]

I don't think that'll work. The WAR Chip (or the software) is designed to operate with the MAFs that Miller sells. Not all MAFs are the same and their output is not linear, each has a characteristic transfer function that maps air mass to output voltage.
Try posting this in the tuning section and you might get a reply from Brody at Miller.

[MR 325]

Castros sells a tune for the M50 MAF but you'll have to ditch the WAR chip to run it.

[Tyler325i]

Screw Brody I hate that turd. And I think I'm just going to try it though just for fun. I just need to know the schematics for the e30s afm plug. It's not its going to make my blow up or light on fire

[sayed ali]

Do an m50 wiring (ecu, maf, coils, etc..)

You'll enjoy it

[nando]

It's not going to work.

[Tyler325i]

well i have an m54b30 and an m52b28 sitting in my garage but i just need the little bit extra to get the m54 going

[barry]

I just did mine it is very easy, if you want to call me I will walk you through the proscess.
PM for my phone number
Barry