Charcoal Canister Purge valve P/N?

[blocke]

Does anyone know the Part Number for this thing? I cannot find emissions related stuff on real OEM at all.
Mine has a tear where it connects to the TB. I tired to take a pic with my phone, but its tough to make out.

It has vac hoses connected to the TB and the charcoal canister, and then a connector that goes into the same loom as the TPS sensor.

Its pictured in the Bentley section 6-16

Anyone know the Part Number?

[E30-325iS]

I've got one some where, I'll see if I can find it tonight and get the part number.

[blocke]

I've got one some where, I'll see if I can find it tonight and get the part number.

Thanks! I appreciate it

[blocke]

Wait..looks like Real OEM calls it something different.
Is this it? http://www.realoem.com/bmw/showparts...07&hg=16&fg=10

If so, fuck that. $165 for this thing? Can I just bypass it and plug the ports on the TB?

[E30-325iS]

The Bosch part number on the valve is 0280142150. The rubber hose that connects it to the TB has part number 1012552-4. If that rubber part is all that is broken you can just pull it off the valve and replace it with a piece of 6mm Id fuel hose, or you can remove it and plug the TB.

[dougie30]

i was wondering the same thing because my canister was rusted and where the hose connected acctually snapped the metal on the canister.

so could i just find a junkyard one and replace it??

[nando]

you can use pretty much any 2-wire bosch PWM purge valve from the E30 era to nearly present day. go to a junkyard and find one off a VW jetta or something