Announcement

Collapse
No announcement yet.

Weird oil leak

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Weird oil leak

    Hello people,

    ik had this weird thing yesterday. Just bought some new rims (bbs RZ 378, yummie yummie) and wanted to put them on the car yesterday.

    I ususally dont lift the front of the car by putting the jack underneath the oil pan. But yesterday i did so. And after being lifted for about 2 minutes I spotted a little puddle of oil.

    Normally my car does leak a bit but like 5 drips in 1 day. Yesterday with the jack underneath it went very very quick. Once i put the car back on the ground the leaking stopped (or normalised to almost nothing).

    I am wondering if you guys have ever experienced this with an m20. I fear that my oil pan doesn't seal good and once having a load on it a minor opening appears or something.

    Does someone know something about this?

    Thanks guys

    BTW, is it really not done to jack an e30 m20 by its oil pan?

    #2
    BTW, is it really not done to jack an e30 m20 by its oil pan?


    NO!!!!! Check for cracks in the pan then slap yourself!

    Comment


      #3
      the oil leak isn't all that weird

      you just cracked your oil pan
      1989 cirrisblau-metallic 325i

      Comment


        #4
        Agreed you put a crack in the pan or just made an existing one bigger.
        Shawn @ Bimmerbuddies
        Bimmerbuddies LLC
        717-388-1256
        2971a Roundtop Rd, Middletown PA 17057
        bimmerbuddiesllc@gmail.com

        Comment


          #5
          not to be harsh... but you're in idiot!
          [/SIGPIC]"we are so totally screwed!"

          Comment


            #6
            Where's the :fail: smiley?

            Check oil pan for cracks. Aluminum oil pan can barely keep itself from leaking under normal conditions.
            90 325i DD/Track
            03 Durango 5.9


            Originally posted by e30mpg
            It is recommended to get new gasket but this is R3v and we just copper spray that shit......slap biotch on and tighten to tq.

            Comment


              #7
              if you really gotta do that, at least put a long 2x4 between the jack and pan lol.

              but coulda used subframe with the 2x4.. or each side on proper points.. or anything else!! lol!!!

              bad luck friend.

              Comment


                #8
                Originally posted by John Beton View Post

                BTW, is it really not done to jack an e30 m20 by its oil pan?
                i usually jack via the side mirror at the front or tailpipe at the back
                89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...

                new build thread http://www.r3vlimited.com/board/showthread.php?t=317505

                Comment

                Working...
                X