m20 valve cover breather size - R3VLimited Forums

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

X

325est13psi

Wrencher

Join Date: Aug 2010

Posts: 267
#1

m20 valve cover breather size

06-07-2014, 09:33 AM

hi r3v!
im at work about to grab some hose to replace the valve cover breather to the
throttle body, does anyone know or have a valve cover lying around to take a measurement of the diameter of the nipple on the valve cover??
3/4?

thanks for your help!
-christian
Tags: None
jaywood

R3V Elite

Join Date: Jul 2010

Posts: 4528
#2

06-07-2014, 10:06 AM

I believe 3/4" will work for you.
Comment
325est13psi

Wrencher

Join Date: Aug 2010

Posts: 267
#3

06-07-2014, 10:19 AM

thank you!!
Comment
TheTacoMan

R3VLimited

Join Date: Nov 2011

Posts: 2308
#4

06-09-2014, 06:21 PM

I believe its 3/4" OD.
Comment
MR 325

Moderator

Join Date: Oct 2003

Posts: 37827
#5

06-10-2014, 01:49 AM

The OEM BMW hose is $8. Why run bulk hose?

BimmerHeads
Classic BMW Specialists
Santa Clarita, CA
www.BimmerHeads.com
Comment
digger

R3V Elite

Join Date: Nov 2005

Posts: 5939
#6

06-10-2014, 03:52 AM

the cover is 22mm OD so something a little smaller in size for the hose ID will work

89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...

new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment

Previous template Next

Working...