Announcement
Collapse
No announcement yet.
Plug under throttle body m20b25
Collapse
X
-
iirc, it plugs in underneath the throttle body someplace. I'll have to look at mine.
Also, you have a vacuum leak on your throttle body--that one hose is blocked off, which is ok, but you have to block it off on the throttle body side, too.
ETA--you also have to block off the vacuum fitting on the rubber intake elbow, too.'90 zinno 325iS
Comment
-
Originally posted by potatomash View PostI think it's for the carcol cannister which appears to not be there.. vacuum leak? You mean where the hoses are missing? I was halfway to putting air intake back together'90 zinno 325iS
Comment
-
The plug does not cause a vacuum leak. It attaches to a purge valve that is connected to a fitting on the bottom of the throttle body. If it's not attached, then you essentially have an open hole in the bottom of your throttle body. Stick your head under there and have a look.Last edited by Hooffenstein HD; 05-26-2015, 09:38 PM.
Comment
Comment