So I am swapping a 1990 m20b25 into my '84 325e but you probably already know that.
Anyway the engine did not come with the vacuum lines from the booster to the throttle body so I went onto bmwfans.info looked at the parts diagram and picked up this from a wrecker.
However now that I look at my intake boot I have no place for that little plastic Y to connect.
As well there is only one connector on the side of my throttle body.
So this brings me to the conclusion that the vacuum system on a 1990 (my engine) and a 1989 (wrecker parts) are different.
So what do I need to make this work, part numbers and any other help would be hugely appreciated.
Anyway the engine did not come with the vacuum lines from the booster to the throttle body so I went onto bmwfans.info looked at the parts diagram and picked up this from a wrecker.
However now that I look at my intake boot I have no place for that little plastic Y to connect.
As well there is only one connector on the side of my throttle body.
So this brings me to the conclusion that the vacuum system on a 1990 (my engine) and a 1989 (wrecker parts) are different.
So what do I need to make this work, part numbers and any other help would be hugely appreciated.
Comment