super charger

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • falcon64
    Member
    • Nov 2007
    • 73

    #1

    super charger

    i talked to a guy on here that said he had a 3.8liter supercharger off a thunder bird, and im wondering is this a common mod i think i can make it work, i was wondering will this decrease the life of my engine, not worried about how hard it is im wondering about how much power it wiil add.


    im 16 cant afford a turbo so dont suggest it, im kinda pissed i just got beat by a prelude, im also on a budget
    sigpic
  • StereoInstaller1
    GAS
    • Jul 2004
    • 22679

    #2
    Beat up on by a Prelude, huh?

    Straight line or corners?

    Corners = you suck, learn to drive
    Straight line = your car sucks in a straight line, get over it.

    Drag racing a BMW is like taking a hooker fishing. It might be fun, but that is not what you bought her for.

    Buy a Mark D chip, it will help.

    Closing SOON!
    "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

    Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

    Thanks for 10 years of fun!

    Comment

    • JasonC
      Site Manager
      • Aug 2006
      • 14451

      #3
      Stick with making your Falcon faster. If someone wants to race you in your e30, just laugh at them and let them go.

      1992 BMW 325iC
      1978 Chevrolet Monte Carlo
      1965 Chevrolet Corvair Monza 140hp

      Comment

      • Jordan325iC
        E30 Mastermind
        • Aug 2005
        • 1697

        #4
        e30tech.com has a sub-forum on supercharging. Search there if you're serious. It can be much cheaper than turbocharging but requires more custom fabrication. I believe the ford thunderbird SC is a fairly common choice.

        '88 325is
        VP UT of Austin Autoholics
        BMWCCA 380364

        Comment

        • atomic
          R3V Elite
          • Jun 2007
          • 5691

          #5
          To put a supercharger off of a T-bird will require you to loose your power steering pump with lots of custom fab work to mount the charger. It will also require a stand alone engine managment system like mega squirt to tune the engine. Also front mounting a intercooler is tricky but can be done as well. All in all in will cost you in the neighborhood of easily $1000+ and honestly since you have a eta car you really need to do the i head swap stuff to help you as much as possible.


          One thing to remember is being on a BUDGET never coincides with CUSTOM WORK... NEVER !!!!


          Originally posted by StereoInstaller1
          Beat up on by a Prelude, huh?

          Straight line or corners?

          Corners = you suck, learn to drive
          Straight line = your car sucks in a straight line, get over it.

          Drag racing a BMW is like taking a hooker fishing. It might be fun, but that is not what you bought her for.

          Buy a Mark D chip, it will help.

          Luke is right ^ and on a budget, if you want a little more in a straight line once you learn to drive, you can always throw a 50 shot of nitrous on to help out but be prepared to do motor work on your 200k motor soon after.

          Comment

          • rs4pro3
            R3V Elite
            • Oct 2003
            • 5808

            #6
            Ya you'll either have to loose power steering or AC. You could probably get around not loosing either, but then it would require removal of the supercharger to do any other engine work.
            I've got an eaton m62 blower on my m20 and absolutely love it, I only spent about $700-$800 for my setup, but that was just in the charger etc.. I already had megasquirt and all that on the car.
            85 325e 2.7 ITB'd stroker

            Comment

            • falcon64
              Member
              • Nov 2007
              • 73

              #7
              i got beat in straight line from a roll at 25mph, its like a 1999 honda prelude with a cold air and an exaughst, ive pulled really far away from it in curves
              sigpic

              Comment

              • kenika65
                E30 Fanatic
                • Aug 2007
                • 1336

                #8
                Originally posted by falcon64
                i got beat in straight line from a roll at 25mph, its like a 1999 honda prelude with a cold air and an exaughst, ive pulled really far away from it in curves

                What you need is a higher rev-limit!

                If you up grade to 1.3 Motronic with a 173ecu you will be at 6300rpm then with a chip 7000+

                Here is a how to.


                1986 325es (69k) Garage Queen Buy It Now 10k;1986 325es (track rat) 2.7i How-To & 1.1/1.3Motronic UpGrade
                1991 318is (daily driver) 1991 318is M42 Maintenance How-To;1989 325i (parts car)

                Comment

                • rThor432
                  No R3VLimiter
                  • Feb 2007
                  • 3907

                  #9
                  Originally posted by falcon64
                  i got beat in straight line from a roll at 25mph, its like a 1999 honda prelude with a cold air and an exaughst, ive pulled really far away from it in curves
                  Well I think it is safe to say that the cold air and exhaust are what won the race for him. Do you have a CAI and exhaust?

                  Seriously, you need an I head. I would never run forced induction on an eta motor, because stock, they just suck. They dont rev high, have a heavy flywheel, and a bad rear gear. An I head and better rear end will make all the difference in the world. Do that first.

                  I just got back from warming up my eta sedan (gets driven once every couple weeks) and then I drove the M3. The eta seems so pathetic right now..

                  Comment

                  • falcon64
                    Member
                    • Nov 2007
                    • 73

                    #10
                    my car

                    no ive looked at the kits for them for e30s but there kinda pricey, thinking about taking the head light out and i have some tubes laying around to make a homemade cold air intake
                    sigpic

                    Comment

                    • xLibelle
                      R3VLimited
                      • Aug 2004
                      • 2673

                      #11
                      Originally posted by atomic
                      One thing to remember is being on a BUDGET never coincides with CUSTOM WORK... NEVER !!!!
                      you must have missed my m62 build i did.

                      Comment

                      • e30s52
                        R3V Elite
                        • Oct 2007
                        • 5235

                        #12
                        i got a ticket for that about 200 bones for missing a head light but then again cops hate my car ;)

                        www.gutenparts.com
                        One stop shopping for NEW, USED and EURO PARTS!

                        Comment

                        • falcon64
                          Member
                          • Nov 2007
                          • 73

                          #13
                          cool

                          thats looks like a damn good looking car though
                          sigpic

                          Comment

                          • neighborhood
                            Grease Monkey
                            • Aug 2005
                            • 361

                            #14
                            You have to remember the golden rule when doing something like this.....
                            "Fast,Cheap,Reliable" Pick two of the three.
                            Originally posted by payney8
                            We heard economics is american for card game t/f ? :P

                            Comment

                            • DCColegrove
                              Banned
                              • Dec 2007
                              • 2748

                              #15
                              Hmmmm.... Can't afford a turbocharger so wants to supercharge...
                              Dude...I don't even know where to begin to answer this one...Got a machine shop?

                              Comment

                              Working...