hey all noob with problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • accident
    R3V OG
    • Sep 2008
    • 7303

    #46
    Yes that is the ETA sensor, and yes you need two.

    Originally posted by ROLLingKING
    i have a bronzit and plan on making it look sweet.
    Originally posted by slammin.e28
    Moral of this story?

    If you drive your e30 on stairs, you're gonna have a bad time.

    Comment

    • nurseklb
      Noobie
      • Nov 2008
      • 36

      #47
      ok so i rechecked the resistance 1000 ish between pin 1 and 2, and open between 3 and 1 and 3 and 2. it was the same for both sensors. would they both go out at the same time? my book says 100,000 ohms between 3 and 2 or1 and i am getting open on both. also the connectors on both sensor sides are brittle one broke off in the harness side connector and i had to dig it out. . . . . .
      why does it have to be a "dead end"? why not just "end"?

      Comment

      • menusk
        Member
        • Oct 2008
        • 96

        #48
        keep going at it man! im counting on you brother ahhah.....same stupid shiz happened to me this morning....if i find a fix ill post it up here. first ill do all the recommended stuff that has been posted. and if you have found the problem please post as alot of these threads just fade without giving the cure to the ailment

        Comment

        • nurseklb
          Noobie
          • Nov 2008
          • 36

          #49
          well i ordered the two sensors and a manual. on sensor one manual and catalog with alot of stuff i want to buy. . . . . . . if i get it running again. the other sensor should be here monday. i will post if it starts up.
          why does it have to be a "dead end"? why not just "end"?

          Comment

          • nurseklb
            Noobie
            • Nov 2008
            • 36

            #50
            well, alright......got the other sensor in.......installed it.....crossed my fingers.......car turned over...and over.....and over......and that was all the damn thing did!!!!!!!
            why does it have to be a "dead end"? why not just "end"?

            Comment

            • nurseklb
              Noobie
              • Nov 2008
              • 36

              #51
              any other ideas?
              why does it have to be a "dead end"? why not just "end"?

              Comment

              • VacMan
                R3VLimited
                • Apr 2007
                • 2405

                #52
                Ground strap?


                1987 E30 cabrio | Bumper swap | H&R Sport | Koni Yellow | Eibach Sways | BavAuto strut bar | Cardinal seats
                MTech2 wheel | Husco Armrest | Smoked Hella Smileys | 5k HID | Stromung | RS003
                | Shadowline | Amber Fogs | Too much else to list



                Comment

                • nurseklb
                  Noobie
                  • Nov 2008
                  • 36

                  #53
                  where is that? i got my book in hand abd went through the ecu electrical tests, all good. could it be my ecu? can i test it?
                  why does it have to be a "dead end"? why not just "end"?

                  Comment

                  • menusk
                    Member
                    • Oct 2008
                    • 96

                    #54
                    hey nurse i just changed the computer on my car and it started right up. im not saying this is your issue but im just letting you know since i wouldnt get spark in my car either. the previous owner "chipped" it and after everything checked out fine this was the last resort and it worked. hopefully you find your issue. good luck

                    Comment

                    • nurseklb
                      Noobie
                      • Nov 2008
                      • 36

                      #55
                      i am thinking that is the same problem with mine........any ideas of where to get a replacement and a cost of this part?
                      why does it have to be a "dead end"? why not just "end"?

                      Comment

                      • nurseklb
                        Noobie
                        • Nov 2008
                        • 36

                        #56
                        YYYYYYYYYYEEEEEEEAAAAAAAAHHHHHHHHHH!!!!!!!!!!!!!! IT RUNS AGAIN!!!!!!!!


                        i replaced the computer and it fired right up. I want to thank EVERYONE that helped. now my car is gonna have to come out of the garage and work again.......again thank you all very much.
                        why does it have to be a "dead end"? why not just "end"?

                        Comment

                        • menusk
                          Member
                          • Oct 2008
                          • 96

                          #57
                          congrats nurseklb!!!!!!!!!!!!!!!!!!!! and yeah it feels real good dont it ahhaa......

                          Comment

                          • nurseklb
                            Noobie
                            • Nov 2008
                            • 36

                            #58
                            yes, it was very nice to drive my car to work this morning. the used parts store that i bought it from is top notch also. I do not plan on doing anything to this car other than drive it because i am looking for a vert to play with.
                            why does it have to be a "dead end"? why not just "end"?

                            Comment

                            Working...