we arent getting spark to the plugs
reference sensors are as they should be, the metal pin is on the flywheel, we swapped coils and stil no change, it just isnt getting spark?
We are at an absolute loss, we have been hard at it since early this morning.
so far we have:
fixed fuseable link
new reference position sensors
checked for metal pin on flywheel and its there
swapped working coil
swapped working cap and rotor
swapped between three ecu's
checked main relay power
we do have fuel pressure to the rail.
we have temp and fuel gages but no dash lights -no check engine light etc.
reference sensors are as they should be, the metal pin is on the flywheel, we swapped coils and stil no change, it just isnt getting spark?
We are at an absolute loss, we have been hard at it since early this morning.
so far we have:
fixed fuseable link
new reference position sensors
checked for metal pin on flywheel and its there
swapped working coil
swapped working cap and rotor
swapped between three ecu's
checked main relay power
we do have fuel pressure to the rail.
we have temp and fuel gages but no dash lights -no check engine light etc.
Comment