Announcement

Collapse
No announcement yet.

V12 swap help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    V12 swap help

    Hello, I am currently in the middle of a m70 v12 swap on my e30 convertible and I am just wondering what wires I would need to start the car. I want to see if I can get it to run before I hook up all the lights and everything. Thank you

    #2
    That's a really open ended question and I doubt you're going to get a straightforward answer. This is probably something you're going to need to figure out on your own. Look up the wiring diagrams for the donor car and the chassis here:
    sigpic
    1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
    1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
    1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]

    Comment


      #3
      Thank you for the reply

      Comment


        #4
        there was a speed shop in poland called pmc that had info and products pertaining to m70 swaps. i don't know if they are active right now due to the war in the region. the swap has also popped up in the netherlands and in sweden. there are likely companies there with products as well.

        Comment


          #5
          On my s38 b36 swap into my e30. I sent my wire harness to Andrew325is to match up with my e30. He sent back with labeling and wired diagram of harness.
          Projects Hartge,Alpina & AC Schnitzer Builds.http://www.r3vlimited.com/board/showthread.php?t=280601
          http://www.r3vlimited.com/board/showthread.php?t=227993
          http://www.r3vlimited.com/board/showthread.php?t=289362

          DSC04926 by Raul Salinas, on FlickrDSC03413 by Raul Salinas, on Flickr

          Comment

          Working...
          X