Announcement

Collapse
No announcement yet.

And another M30 swap begins

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    I have a 2.93 and its way to long for my liking. 40 in 1st , 75 in 2nd :) hondas dont like me cause they have to shift and by then im gone hahahhaha
    84' 318i m30b35 swapped!

    Comment


      #32
      i just finished a 1200 mile trip with my 3.25 gears and it was a joy on the highway.

      and yes you need that sheet metal.

      Need Illustration or Design work? www.robbiebyerly.com

      Comment


        #33
        damn rick i was hopin u wouldn't say that bcause mine didn't come with it

        Comment


          #34
          I don't think I have that plate. Only problem I'm having is some rattling noises at idle up to about 1200rpm

          Comment


            #35
            I don't remember mine having that. Hm.

            Comment


              #36
              I know it´s worlds apart probably, but must one install the LSD when doing this swap? I mean, is it mandatory? I´m still collecting parts and this is drying my bank account like crazy.
              E30Beast, what kind of engine did you have in it?
              Last edited by Gadea; 02-05-2010, 10:43 PM. Reason: forgot to ask
              1998 528i auto on staggered DSII

              Comment


                #37
                Well, unless you like spinning one wheel then it's not mandatory ;)

                Seriously though, depends on what you will be doing with the car... it's not like open diff will prevent you from driving a car, but having an open diff in a FWD or RWD car with lots of hp/tq = not fun.
                Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                Comment


                  #38
                  I think mine had that plate - you could check my project thread. I'm sure I trashed it.
                  Originally posted by Matt-B
                  hey does anyone know anyone who gets upset and makes electronics?

                  Comment


                    #39
                    Originally posted by yert315 View Post
                    I don't think I have that plate. Only problem I'm having is some rattling noises at idle up to about 1200rpm
                    man if thats all it that goes wrong i can deal with that, i thought it was something major

                    Comment


                      #40
                      Originally posted by Gadea View Post
                      I know it´s worlds apart probably, but must one install the LSD when doing this swap? I mean, is it mandatory? I´m still collecting parts and this is drying my bank account like crazy.
                      E30Beast, what kind of engine did you have in it?
                      hahahaha talk about drying your bank account lol bcause im in that same situation nd its not in the car yet but hopefully pretty soon but its a 91 b35

                      Comment


                        #41
                        Originally posted by george graves View Post
                        I think mine had that plate - you could check my project thread. I'm sure I trashed it.
                        will do george graves will do

                        Comment


                          #42
                          Is a 3.73 lsd all that bad cause i have 2 options that i see all the time at the local junk yard nd thats the 3.73 nd the 2.93 just trying to figure out what would u guys suggest to be the best option

                          Comment


                            #43
                            3.73 over a 2.93 ANY day. I am running a 2.93 right now because the 3.73 I had in blew up after a mile (Check your gear oil!!!). But for the mile I had it in, it was much more user friendly.

                            And a 3.73 will likely increase gas mileage, contrary to what many people think. Running a 2.93 takes more gas to get the car going and maintaining speed. The only time a 2.93 would be sufficient is if you have 300+ HP or you travel ridiculous miles on the freeway. Even then a 3.25 would better suit the car/motor.

                            Comment


                              #44
                              I think of the 3.73 on a m30 like running a 4:10 on a m20. Maybe the 3.73/m30 is a bit shorter feeling?
                              Originally posted by Matt-B
                              hey does anyone know anyone who gets upset and makes electronics?

                              Comment


                                #45
                                thanks everyone for all your helpful inputs, i wish i could find a 3.25 but those are hard to come by out here so i guess ill just stick to the 3.73

                                Comment

                                Working...
                                X