I have a 2.93 and its way to long for my liking. 40 in 1st , 75 in 2nd :) hondas dont like me cause they have to shift and by then im gone hahahhaha
And another M30 swap begins
Collapse
X
-
-
i just finished a 1200 mile trip with my 3.25 gears and it was a joy on the highway.
and yes you need that sheet metal.Comment
-
I know it´s worlds apart probably, but must one install the LSD when doing this swap? I mean, is it mandatory? I´m still collecting parts and this is drying my bank account like crazy.
E30Beast, what kind of engine did you have in it?1998 528i auto on staggered DSIIComment
-
Well, unless you like spinning one wheel then it's not mandatory ;)
Seriously though, depends on what you will be doing with the car... it's not like open diff will prevent you from driving a car, but having an open diff in a FWD or RWD car with lots of hp/tq = not fun.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
-
I think mine had that plate - you could check my project thread. I'm sure I trashed it.Originally posted by Matt-Bhey does anyone know anyone who gets upset and makes electronics?Comment
-
Comment
-
3.73 over a 2.93 ANY day. I am running a 2.93 right now because the 3.73 I had in blew up after a mile (Check your gear oil!!!). But for the mile I had it in, it was much more user friendly.
And a 3.73 will likely increase gas mileage, contrary to what many people think. Running a 2.93 takes more gas to get the car going and maintaining speed. The only time a 2.93 would be sufficient is if you have 300+ HP or you travel ridiculous miles on the freeway. Even then a 3.25 would better suit the car/motor.Comment
-
I think of the 3.73 on a m30 like running a 4:10 on a m20. Maybe the 3.73/m30 is a bit shorter feeling?Originally posted by Matt-Bhey does anyone know anyone who gets upset and makes electronics?Comment
Comment