Position 3 Users, Please Help!

[VacMan]

So this is why a electric fan will not work?!?!?!

Beat me to it. He just keeps digging in deeper.

[Stephen]

SoCal's not even that hot.

[zaust]

It actually get's very hot here in the summer not for long but it does. And we get no breez so the humidity is stupid and coupled with all the car fumes it's horrible, Never had an issue with heat as the e32 ac fan produces more air than any viscous fan especially in traffic at idel. Btw I used to live in malaga spain where it is proberly hotter for longer and has torist traffic, No issuses there with my mates turbo m30 or my old 2.7 with electric fan conversion !!!.

[Iain]

Where is Doghnut? He has an M30 out here. In fact it gets fucking hot and fucking humid (sometimes both at the same time) I've never heard of anyone with a highly strung car having issues with a leccy fan when it's sized right and you have a good shroud/undertray

[Doughnut]

Where is Doghnut? He has an M30 out here. In fact it gets fucking hot and fucking humid (sometimes both at the same time) I've never heard of anyone with a highly strung car having issues with a leccy fan when it's sized right and you have a good shroud/undertray

I'm running a/c and original e30 electric fan with no issues. summer wasn't too bad this year though ;)

[Ray Smoodiver]

So now we've got 3 different continents telling Japansy to pull his head in. Brilliant :D

[der affe]

here is pics of my conversion. i am sure that i will over heat my engine and warp the head now since i *2* electric fans . (one pusher, a pusher from a Z-3 roadster and a 2500CFM flex-a-lite puller.) the puller is wired with an E36 temp switch the low speed and when it hits high speed BOTH fans come on. it has to get up to just over 1/2 on the temp gauge before the puller will come on and with in 30-45 seconds the temp drops to UNDER 1/4. no shroud, STOCK radiator. i am putting a musimoto in in a couple of weeks though for the extra heat from boosting the new motor.

it gets HOT here and stays hot and shitty for most of the summer. NO issues at all.









i have cleaned up and loomed the wiring since these pics were taken.

when you FINALLY give in and go electric. i can forward you a simple wiring diagram to wire both fans up.

[lashtx]

AC questions

I'm running a/c and original e30 electric fan with no issues. summer wasn't too bad this year though ;)

May I ask what compressor you are using and did you have to have custom lines made?

here is pics of my conversion. i am sure that i will over heat my engine and warp the head now since i *2* electric fans . (one pusher, a pusher from a Z-3 roadster and a 2500CFM flex-a-lite puller.) the puller is wired with an E36 temp switch the low speed and when it hits high speed BOTH fans come on. it has to get up to just over 1/2 on the temp gauge before the puller will come on and with in 30-45 seconds the temp drops to UNDER 1/4. no shroud, STOCK radiator. i am putting a musimoto in in a couple of weeks though for the extra heat from boosting the new motor.

it gets HOT here and stays hot and shitty for most of the summer. NO issues at all.









i have cleaned up and loomed the wiring since these pics were taken.

when you FINALLY give in and go electric. i can forward you a simple wiring diagram to wire both fans up.

Would you mind PM me the diagram? I am going to go electric from the start.
Thanks for your help.

kris

[rav320uk]

^^^^^^^^^^^^^^^^Thats no M30 though, so space is limited at the front^^^^^^^^^

[george graves]

M20's are so cute! :)

[wildstoats]

[gazellebeigem3]

Id love to use japandrews mom in position three


hiooooooooo

[chadthestampede]

Id love to use japandrews mom in position three


hiooooooooo

loooooooooooooooooooooooooool

[george graves]

Position 3


I use this position a lot. No fan required.

[der affe]

May I ask what compressor you are using and did you have to have custom lines made?



Would you mind PM me the diagram? I am going to go electric from the start.
Thanks for your help.

kris

no prob. i will when i get back home.

as for the a/c lines, are you running a rotary comp or the stock comp?
you are supposed to get new lines made up with the rotary. i don't know why though. my stock lines bolted up th the rotary comp. i did get lucky 2 weeks ago and found a car that had the conversion so i snagged the remade lines for my car.