N/A M30 Build Finally Complete, Dyno

[LKTe30]

I have finally finished my n/a m30 build and got it on the dyno. The engine was competely taken down and rebuilt and probably has a total of 5 hours on it now.

Engine: M30b35
Mods: 0.5 overbore, 10.5:1 pistons, 292 cam, 5 angle valve job, port and polish, custom headers, mls head gasket, balanced and blueprinted, electromotive tec2

[E30SPDFRK]

Wow, those are awesome numbers! That's 40 whp over what my stock one made. And the shape still looks the same, must be a lot of fun to drive.

[sayed ali]

^^ all those mods and only 40whp more?

what if you put a turbo on with those mods? how much whp more than the stock you will get?

but sure that must be a lot of fun to drive and alot of torque :)

[Sagaris]

^^ all those mods and only 40whp more?

what if you put a turbo on with those mods? how much whp more than the stock you will get?

but sure that must be a lot of fun to drive and alot of torque :)

Great work OP! I would be interested in seeing some acceleration clips

[VinniE30]

This is a very similar m30 build to jb325is. He he made around 220whp if I recall correctly. He posted it on here.
My m30 has the schrick 284/280 cam and 10:1 pistons. Feels good man.

[LJ851]

Nice work! Those numbers are pretty close to my Schnitzer 3.7 liter M30 powered car. What rear gear are you running?

http://www.r3vlimited.com/board/showpost.php?p=2634106&postcount=1

[CorvallisBMW]

Wow, solid numbers! must be a hoot to drive

[Doughnut]

Tough-enough, for a street driven e30 :-)

[LKTe30]

the car is definitely fun to drive. i am running the stock 325is lsd but might be looking to change to a taller gear. here is a pic of the car, it is a purpose built track car and i will be taking it out again on the 26th and hope to have some video of it from that event

[LJ851]

Would love to see some videos.

[Rugbyfan]

has this car ever been at delta V motorsports?

[LKTe30]

yes, it was at delta v in order to sort an issue with the timing chain which then turned into a few other things

[yert315]

Those are some impressive numbers! Make some s52 guys shake in their boots!

[Jean]

OP - nice results! Thanks for posting the dyno as well!

^^ all those mods and only 40whp more?

what if you put a turbo on with those mods? how much whp more than the stock you will get?

but sure that must be a lot of fun to drive and alot of torque :)

That's not exactly A LOT of mods for 40whp out of a SINGLE CAM 12v. Hard to make them FLOW more air to make more hp w/o boost.

[CarsSuck]

I'm amazed that your torque curve looks like that with a 292. Must be a blast to drive. Where'd you have the machine work done?