How many BSP barbed fittings do you need!?
-
///Monstrosity. (OO≡≡[][]≡≡OO)
Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.
-
Ok, turns out the k24 I bought was junk. Someone over heated it enough to drop a sleeve .008" into the block. The pic Fred posted is from the new Vw 20v setup that was planned for my mk4 gli. It's hooked up to another Nissan trans. This one is from a ka24/240sx. Audi 80 2.0 flywheel and starter, oilite pilot bushing. Used the clutch pressure plate and disc from the k motor setup. Had the flywheel cut and redrilled to bolt it together. The turbo is a evo9 20g, twin scroll individual egt and dual back pressure sensors in the collectors. Dual plenum intake manifold, 1000cc ev14's, modified 944 intercooler and an eBay Honda half rad. Just received my 1310 diff flange in the mail and the trans is going to the local Z car transmission wizard for a rebuild. I still have the k24 block and the trans and the mounts and trans crossmember. If I come across another (not fubared) k, I'll pick it up. That's about everything that's happened in the past few months haha$4000 worth of wheels to look cool in a parking lot? What the hell is wrong with him? - My old bossComment
-
Oh whoops! That's a lot of fab work to happen in a few months' time. Don't be a stranger to R3v!
Comment
-
Yeah, it sucks but it will work out. I don't have internet access at home so it's a little more difficult to keep up with threads on here. I'm in the middle of restoring an '84 RZ350 at the same time, hard to keep up with everything. This might end up being twin charged after it's on the road for a while, I want to enjoy it for a little while before it comes back apart.$4000 worth of wheels to look cool in a parking lot? What the hell is wrong with him? - My old bossComment
-
Oil pan tacked up. Just have to add the drain plug.$4000 worth of wheels to look cool in a parking lot? What the hell is wrong with him? - My old bossComment
-
I was afraid this thread died a while ago, but damn this really makes me want to swap a K series in my e30.Originally posted by priapismOriginally posted by shamesonComment
-
Interior of the manifold$4000 worth of wheels to look cool in a parking lot? What the hell is wrong with him? - My old bossComment
-
More mock up to start measuring for a bolt/nut order. Don't mind my messy kitchen :P$4000 worth of wheels to look cool in a parking lot? What the hell is wrong with him? - My old bossComment
-
Street wheels and tires are mounted and balanced. I'll get some pics this afternoon, 15x9 esm 007 with falken 225/50-15's. I pulled all of the wiring out if the car and started trimming the body harness down, I've pulled about 5 lbs of excess wire so far. All of the factory obc, power mirror wiring, etc. The bov and flange showed up last week also. Not much time to work on it lately, 60+ hour work weeks.$4000 worth of wheels to look cool in a parking lot? What the hell is wrong with him? - My old bossComment
-
[IMG]http://[URL=http://s1251.photobucket.com/user/slowgti18t/media/B443C999-4EC9-4290-AEED-1B083396546D.jpg.html]$4000 worth of wheels to look cool in a parking lot? What the hell is wrong with him? - My old bossComment
-
Haha, I love that you're building the engine in the kitchen.Comment
-
The advantages of being a single man haha @fredk$4000 worth of wheels to look cool in a parking lot? What the hell is wrong with him? - My old bossComment
-
I picked up a new daily last night as well.$4000 worth of wheels to look cool in a parking lot? What the hell is wrong with him? - My old bossComment
Comment