Announcement

Collapse
No announcement yet.

E30 with 13BT

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    E30 with 13BT

    Anyone please hit me with comments
    Im planning to install a 13BT which is comes from FC3S5 donor


    Sent from my GT-N7100 using Tapatalk 2
    Victor LoProfessional Tuner and Racing Management

    Engine Mods, Dyno tuning, race car builder
    Engine Management Specialist

    Authorized Dealer of Dastek Unichip Central Java
    FB: victorgaragesmg@gmail.com
    Pin BB : 24BE53C6

    Whatsapp : +6282134331733
    Line and wechat id: victorlodastek

    #2
    Coming from someone who owned 5 RX-7's, just don't.
    1991 325i - "Scambles" The Daily Driven lightly modded.
    1988 Mazda RX-7 TII "Mako" The Free Dorito
    bacon by Jared Laabs, on Flickr

    Comment


      #3
      Rotaries are typically swapped into cars that are a lot lighter than the donor rx7, like a spitfire or bugeye sprite. Aren't the second gen turbos about the same power as an m20b25? For the same amount of hassle, you could probably make more power with a turbo m20.

      Comment


        #5
        Originally posted by AwakenNoMore View Post
        Coming from someone who owned 5 RX-7's, just don't.
        Wow wow... who do u mean ?

        Sent from my GT-N7100 using Tapatalk 2
        Victor LoProfessional Tuner and Racing Management

        Engine Mods, Dyno tuning, race car builder
        Engine Management Specialist

        Authorized Dealer of Dastek Unichip Central Java
        FB: victorgaragesmg@gmail.com
        Pin BB : 24BE53C6

        Whatsapp : +6282134331733
        Line and wechat id: victorlodastek

        Comment


          #6
          Originally posted by redlightpete View Post
          Rotaries are typically swapped into cars that are a lot lighter than the donor rx7, like a spitfire or bugeye sprite. Aren't the second gen turbos about the same power as an m20b25? For the same amount of hassle, you could probably make more power with a turbo m20.
          Thanks for the input... but in my country is very hard to find m20 it is cheaper to buy a 13bt coming drom fc3s s5... include manual gbox and ecm also wiring harness for just about half price of a m50 engine only...
          And i think rotary will give me less trouble...
          Can u help me to know what gonna be my prob or hassle for aplying 13bt?

          Sent from my GT-N7100 using Tapatalk 2
          Victor LoProfessional Tuner and Racing Management

          Engine Mods, Dyno tuning, race car builder
          Engine Management Specialist

          Authorized Dealer of Dastek Unichip Central Java
          FB: victorgaragesmg@gmail.com
          Pin BB : 24BE53C6

          Whatsapp : +6282134331733
          Line and wechat id: victorlodastek

          Comment


            #7
            Originally posted by B318RV View Post
            And i think rotary will give me less trouble...
            Until you have to pull the motor down to do your first set of apex seals ;)
            ///Monstrosity. (OO≡≡[][]≡≡OO)

            Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.

            Comment


              #8
              Originally posted by Doughnut View Post
              Until you have to pull the motor down to do your first set of apex seals ;)

              awwwwww
              ive been through there alot
              and im ready for rotary
              just need to gather more info
              Victor LoProfessional Tuner and Racing Management

              Engine Mods, Dyno tuning, race car builder
              Engine Management Specialist

              Authorized Dealer of Dastek Unichip Central Java
              FB: victorgaragesmg@gmail.com
              Pin BB : 24BE53C6

              Whatsapp : +6282134331733
              Line and wechat id: victorlodastek

              Comment


                #9
                Originally posted by B318RV View Post
                Wow wow... who do u mean ?

                Sent from my GT-N7100 using Tapatalk 2
                I loved my rx-7's to death, which happened, because they break. Its a smooth lovely engine when it works, but the torque delivery and sound of a 12 valve inline six is just so much more enjoyable. Also the reliability now is just great, not having to always fearfully watch my water temp gauge is great.
                1991 325i - "Scambles" The Daily Driven lightly modded.
                1988 Mazda RX-7 TII "Mako" The Free Dorito
                bacon by Jared Laabs, on Flickr

                Comment


                  #10
                  Originally posted by AwakenNoMore View Post
                  I loved my rx-7's to death, which happened, because they break. Its a smooth lovely engine when it works, but the torque delivery and sound of a 12 valve inline six is just so much more enjoyable. Also the reliability now is just great, not having to always fearfully watch my water temp gauge is great.
                  Aahh i see.. i really get what u mean now...
                  Yeah i mostly agree with u...
                  But the thing is... very hard to find any m20 or even m50 here in my country
                  But i can find lots of rotaries here in a good price and it also comes with the tranny
                  So i might go with the rotary...


                  Sent from my GT-N7100 using Tapatalk 2
                  Victor LoProfessional Tuner and Racing Management

                  Engine Mods, Dyno tuning, race car builder
                  Engine Management Specialist

                  Authorized Dealer of Dastek Unichip Central Java
                  FB: victorgaragesmg@gmail.com
                  Pin BB : 24BE53C6

                  Whatsapp : +6282134331733
                  Line and wechat id: victorlodastek

                  Comment


                    #11
                    Originally posted by B318RV View Post
                    Aahh i see.. i really get what u mean now...
                    Yeah i mostly agree with u...
                    But the thing is... very hard to find any m20 or even m50 here in my country
                    But i can find lots of rotaries here in a good price and it also comes with the tranny
                    So i might go with the rotary...


                    Sent from my GT-N7100 using Tapatalk 2
                    Bring it on!

                    Be sure to take plenty of photo's during installation process, should be a fun car once complete.
                    ///Monstrosity. (OO≡≡[][]≡≡OO)

                    Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.

                    Comment


                      #12
                      Originally posted by AwakenNoMore View Post
                      Coming from someone who owned 5 RX-7's, just don't.
                      sorry already dd
                      Victor LoProfessional Tuner and Racing Management

                      Engine Mods, Dyno tuning, race car builder
                      Engine Management Specialist

                      Authorized Dealer of Dastek Unichip Central Java
                      FB: victorgaragesmg@gmail.com
                      Pin BB : 24BE53C6

                      Whatsapp : +6282134331733
                      Line and wechat id: victorlodastek

                      Comment


                        #13
                        Originally posted by redlightpete View Post
                        Rotaries are typically swapped into cars that are a lot lighter than the donor rx7, like a spitfire or bugeye sprite. Aren't the second gen turbos about the same power as an m20b25? For the same amount of hassle, you could probably make more power with a turbo m20.
                        customer request...
                        want to be like this
                        Victor LoProfessional Tuner and Racing Management

                        Engine Mods, Dyno tuning, race car builder
                        Engine Management Specialist

                        Authorized Dealer of Dastek Unichip Central Java
                        FB: victorgaragesmg@gmail.com
                        Pin BB : 24BE53C6

                        Whatsapp : +6282134331733
                        Line and wechat id: victorlodastek

                        Comment


                          #14
                          Originally posted by Doughnut View Post

                          Bring it on!

                          Be sure to take plenty of photo's during installation process, should be a fun car once complete.
                          will posted once running
                          now installed most of the parts.. just waiting to the radium fuel rail kit and ewp kit from turblown
                          Victor LoProfessional Tuner and Racing Management

                          Engine Mods, Dyno tuning, race car builder
                          Engine Management Specialist

                          Authorized Dealer of Dastek Unichip Central Java
                          FB: victorgaragesmg@gmail.com
                          Pin BB : 24BE53C6

                          Whatsapp : +6282134331733
                          Line and wechat id: victorlodastek

                          Comment


                            #15
                            this is still on my todo list, right after a 5cyl into the coupe
                            1990 325i Cashmere Beige

                            "I don't like question marks. They're like exclamation points, but think they're fancy because they're curved. I won't tolerate it." -MNChiefsan

                            Comment

                            Working...
                            X