M30 5spd

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 416stroker
    R3VLimited
    • May 2008
    • 2448

    #286
    Originally posted by Jean
    BDK - cool, i'll consider this.

    416 - yeah, last time I went was years ago and I believe it was on Wedesday, I could only get 2 or 3 runs as I had to put a dial in on my car on how fast I think it would go... I think it was bracket racing? I was out after my 2nd run as I ran faster. I don't want to do that again.
    Its worse now. When I went with my car I made 1pass before eliminations. Test and tune would be the best bet. But I used to bracket race on sat. When I was in highschool because They put vht down that was the only day my old Plymouth woundnt do funnycar burn outs off the line lol. I have friend that still dose it ill c when the next race is and if they still have a street class
    84 318I Delphin RIP
    87 325IS delphin 24v Sold
    89 325 Alpineweiss

    Comment

    • Jean
      Moderator
      • Aug 2006
      • 18228

      #287
      Cool. 1 pass and you are done is not going to be worth it, i'll need a couple passes to figure out how to launch it w/o sitting there spinning tires since this isn't AWD lol
      Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



      OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

      Comment

      • 416stroker
        R3VLimited
        • May 2008
        • 2448

        #288
        ya 1 qualifying Lap blows. I know I could get into the low 14s if I play with my launch.
        84 318I Delphin RIP
        87 325IS delphin 24v Sold
        89 325 Alpineweiss

        Comment

        • 416stroker
          R3VLimited
          • May 2008
          • 2448

          #289
          Ok they have test and tunes every Friday its 100 it used to be50 so fuck that. You get as many passes as you want and they prep the track.
          On Saturdays you get three qualifing passes before eliminations its $25.

          Or we can go september 13 its 35 bucks and heads up grudge racing that sounds like fun.I want my brother to bring his car I wanna see if I can beet his firebird again with his new mods.

          Cari tahu alasan pemain memilih Mild88. Akses mudah tanpa blokir, transaksi cepat, dan pengalaman aman yang bisa diandalkan. Akses sekarang.


          The E/T series si done for the year so grudge night would be the best bet.
          Last edited by 416stroker; 08-26-2009, 10:45 PM.
          84 318I Delphin RIP
          87 325IS delphin 24v Sold
          89 325 Alpineweiss

          Comment

          • BonnschE30
            Wrencher
            • Jun 2008
            • 295

            #290
            Congratulations man, looks like all the patience and hard work has paid off! Props for doing this the right way.

            I appreciate all the time you've taken to document your build, I've really enjoyed this thread and its been a great motivation to stick an m30 under the hood of my 4door.

            Looks likes it was a lot of fun, so now enjoy it! and lets see what the chipped ECU will do for it....

            Comment

            • Jean
              Moderator
              • Aug 2006
              • 18228

              #291
              Originally posted by 416stroker
              Ok they have test and tunes every Friday its 100 it used to be50 so fuck that. You get as many passes as you want and they prep the track.
              On Saturdays you get three qualifing passes before eliminations its $25.

              Or we can go september 13 its 35 bucks and heads up grudge racing that sounds like fun.I want my brother to bring his car I wanna see if I can beet his firebird again with his new mods.

              Cari tahu alasan pemain memilih Mild88. Akses mudah tanpa blokir, transaksi cepat, dan pengalaman aman yang bisa diandalkan. Akses sekarang.


              The E/T series si done for the year so grudge night would be the best bet.
              $100 deal is too rich for my blood right now, $50 would have been doable. So, I guess it will have to be saturday with 3 passes for $25 or Sept 13th. But, is Grudge Racing = bracket racing?



              Originally posted by BonnschE30
              Congratulations man, looks like all the patience and hard work has paid off! Props for doing this the right way.

              I appreciate all the time you've taken to document your build, I've really enjoyed this thread and its been a great motivation to stick an m30 under the hood of my 4door.

              Looks likes it was a lot of fun, so now enjoy it! and lets see what the chipped ECU will do for it....
              Thanks man! I tried to document the minor things too, most of the stuff has already been documented by others but I figure having it all in one thread might help others with the same swap.
              Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



              OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

              Comment

              • 416stroker
                R3VLimited
                • May 2008
                • 2448

                #292
                Grudge is heads up so we can race each other I think we get to pick who we run against. Ill race you: )
                84 318I Delphin RIP
                87 325IS delphin 24v Sold
                89 325 Alpineweiss

                Comment

                • E30SPDFRK
                  Moderator
                  • Jul 2007
                  • 5687

                  #293
                  Congratulations dude! I had lost track of this thread and just saw that you got it running.
                  Byron
                  Leichtbau

                  Comment

                  • Jean
                    Moderator
                    • Aug 2006
                    • 18228

                    #294
                    Thanks dude.

                    On another note, E32/E34 airbox is f-ing huge. It's not exactly an easy fit in the bay... I ruined one box today (lower section), but picked up another today to try and fit it tomorrow.

                    Of course K&N filter is not CARB legal - http://www.knfilters.com/search/prod...Prod=57-0130-1
                    Last edited by Jean; 08-29-2009, 10:23 PM.
                    Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                    OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                    Comment

                    • BDK
                      Mod Crazy
                      • Jul 2008
                      • 684

                      #295
                      Of course K&N filter is not CARB legal
                      Not good for these motors anyway....

                      Alot on Mye28 about them, nothing very good...

                      Comment

                      • LowR3V'in
                        R3V Elite
                        • Feb 2004
                        • 4209

                        #296
                        Originally posted by Jean

                        On another note, E32/E34 airbox is f-ing huge. It's not exactly an easy fit in the bay... I ruined one box today (lower section), but picked up another today to try and fit it tomorrow.
                        What the heck are you talking about?!?!?!
                        It fit's perfectly in the e30 bay. I even use the stock e34 velocity stack.

                        Comment

                        • Jean
                          Moderator
                          • Aug 2006
                          • 18228

                          #297
                          Dude, it has to almost press against the head and the corner of the radiator. Not exactly a perfect fit in my book lol
                          Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                          OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                          Comment

                          • Jean
                            Moderator
                            • Aug 2006
                            • 18228

                            #298
                            Originally posted by BDK
                            Not good for these motors anyway....

                            Alot on Mye28 about them, nothing very good...
                            Yeah I read that too, I was considering it from the ease of installation
                            perspective
                            vs. the stock huge box :)
                            Last edited by Jean; 09-01-2009, 02:31 PM.
                            Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                            OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                            Comment

                            • Jean
                              Moderator
                              • Aug 2006
                              • 18228

                              #299
                              Numbers from a "pre-test". I am not sure what the upper limit for NO(x) is for 91 535/735i cars....

                              Last edited by Jean; 09-01-2009, 01:43 PM.
                              Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                              OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                              Comment

                              • whiltebeitel
                                R3VLimited
                                • Apr 2007
                                • 2098

                                #300
                                I think that's good, Isn't the average PPM of NOx ~200?
                                '89 325i track sloot
                                '01 530i daily

                                -Enginerd

                                Comment

                                Working...