Shortened M42 Oil pan

[hootie]

if you have the mad money http://www.gttechnic.com/catalog.html

theres a drysump about 2/3 way down haha

At that point I would just throw in an M50/S50

[namsayin]

At that point I would just throw in an M50/S50

for you, even though its not an m42 you get the point



i drove around like that and killed the shit out of my skidplate on the one drive i had with it.

[hootie]

for you, even though its not an m42 you get the point



i drove around like that and killed the shit out of my skidplate on the one drive i had with it.

See but you are so much lower than me. My front still has about 3/4 inch of fender gap that I am trying to hide. I just can't seem to do it unless I go lower.

[namsayin]

See but you are so much lower than me. My front still has about 3/4 inch of fender gap that I am trying to hide. I just can't seem to do it unless I go lower.

camber plates will definitely help you hide that gap!

[hootie]

camber plates will definitely help you hide that gap!

Already running GC camber plates...

[e304me]

Everyone tries to slam the shit out of their cars but you are in fact making it handle worse not better. The more you lower it the more the roll center is lowered thus the car rolls more not less

[wolfgangstbd]

the reason most cars handle worse is because you mess with the suspension geometry

The location of the geometric roll center is solely dictated by the suspension geometry. The SAE definition of the force based roll center is "The point in the transverse vertical plane through any pair of wheel centers at which lateral forces may be applied to the sprung mass without producing suspension roll".

its old news most people that lower their cars dont care

[hootie]

Everyone tries to slam the shit out of their cars but you are in fact making it handle worse not better. The more you lower it the more the roll center is lowered thus the car rolls more not less

I have a separate race car for a reason. You actually think I would track a 318 anyway?

[e30nub]

the reason most cars handle worse is because you mess with the suspension geometry

The location of the geometric roll center is solely dictated by the suspension geometry. The SAE definition of the force based roll center is "The point in the transverse vertical plane through any pair of wheel centers at which lateral forces may be applied to the sprung mass without producing suspension roll".

its old news most people that lower their cars dont care

I can google too! haha

[wolfgangstbd]

it was to just get a definition

[e30nub]

it was to just get a definition

Haha I was totally messing with you! I obviously did the same to find out.

[kenika65]

Bad ass not a bad price either, counting the amount of money I have spent on oil pans and oil......

[ejnight]

Give one of my skid plates a shot. This is one on a 318is with an m42.

[wolfgangstbd]

did you remake them? i heard most m42 pans hang low but i never really looked into it

[ejnight]

did you remake them? i heard most m42 pans hang low but i never really looked into it

They do and I did. All my skid plates as custom for the motor you are running.