m42 turbo kit for 1991 318is????

[Dj Buttchug]

Hey, that's my car!

https://www.hqautosport.com

Now putting down more than 330RWHP and racing in BMW CCA Club Racing

do have any volume diagrams/ measurements for your intake. I want to build my own.any quick tips? I know there is a formula for the correct volume related to engine size ect ect.

[!kid]

330+ WHP on race gas right?

oh and I plan on copying your setup for my track car build :pimp:

[rob_e30]

Hey, that's my car!

https://www.hqautosport.com

Now putting down more than 330RWHP and racing in BMW CCA Club Racing

[!kid]

Waaaaaaaaaa
I demand links or pics or anything!!! Must know more

http://r3vlimited.com/board/showthread.php?t=185470

[Car Addict]

a member on this forum is making just under 300whp with JE pistons but stock rods,crank, block and head not sure if the head had a Port and polish job.

Waaaaaaaaaa
I demand links or pics or anything!!! Must know more

[Midnighttuning]

PM me some info.. i would like to know about that.

contact me at midnight-tuning@rogers.com if you need some info :)

[!kid]

what's the max hp can a stock m42 motor handle before throwing a rod???

a member on this forum is making just under 300whp with JE pistons but stock rods,crank, block and head not sure if the head had a Port and polish job.

[jakeb]

I am going to be building a turbo m42 in a 2002 in the early summer. Planning on going with stock motronic.

[thebutcher37]

I can tell you however that you can easily piece together your own kits for under $1500
Best Regards|

PM me some info.. i would like to know about that.

[Midnighttuning]

Here is a 15psi run I did in my e36 M42
I was going to put out a kit w/tune for the e30 and all for 12psi , but I have been side tracked with other projects

If people show enough interest I would be willing to set-up a kit w/tune for 10 to 12psi, stock internals, draw threw AFM , 42LB injectors, 2.5 exhaust, T3/T4 hybrid turbo

I can tell you however that you can easily piece together your own kits for under $1500

Here is my turbo M42 \/

http://www.youtube.com/watch?v=M38uEQetPKU

http://www.youtube.com/watch?v=tN-mR6P0MWc

Best Regards|

[immajackuup]

Shyah. Just a short jaunt over to PA. A company like VAC that has the resources ought to pick up a cheap 318i and develop a kit imo. There are a lot of e36 guys interested in this as well.

sweet,tired of civic and tegs picking on me.

[Ryann]

Shyah. Just a short jaunt over to PA. A company like VAC that has the resources ought to pick up a cheap 318i and develop a kit imo. There are a lot of e36 guys interested in this as well.

[SimplyDope]

I wouldn't mind dropping my car off on the other side of the border for testing :D

[Ryann]

Someone needs to develop a low pressure bolt on kit for $2000. It would sell like hot cakes. No intercooler, using stock engine management with a chip for the DME. Just a manifold, a turbo, a Bosch bypass valve, and some hardware and plumbing. 5-7 psi. I emailed VAC about this just yesterday and Chris seems to think they can come close, but they'd need a customer car to experiment with. Anyone?

[trackjunkie21]

M42s are plenty friendly if you aren't fucking retarded.

I'm hoping to develop something in the upcoming months.

Finally somone who wants to develop a turbo kit for us m42 guys.