m42 turbo kit for 1991 318is????

[Dj Buttchug]

Sc is also somewhat limited so to speak. with a turbo you have much more options and can put out much more power

[trackjunkie21]

The DASC hasn't been availabe new for a number of years, so it isn't really a viable option.

It's out again, this time for the e30.

[Massimo]

It's out again, this time for the e30.

Link Please

[trackjunkie21]

Link Please

Call Downing atlanta, I have heard from multiple people that it's back out.

[immajackuup]

what's the max hp can a stock m42 motor handle before throwing a rod???

[trackjunkie21]

what's the max hp can a stock m42 motor handle before throwing a rod???

search hp and search lbft of torque.

[immajackuup]

guess 250hp,also it seem like m42 motor aren't FI friendly comparing to m10.

[Danny]

M42s are plenty friendly if you aren't fucking retarded.

I'm hoping to develop something in the upcoming months.

[trackjunkie21]

M42s are plenty friendly if you aren't fucking retarded.

I'm hoping to develop something in the upcoming months.

Finally somone who wants to develop a turbo kit for us m42 guys.

[Ryann]

Someone needs to develop a low pressure bolt on kit for $2000. It would sell like hot cakes. No intercooler, using stock engine management with a chip for the DME. Just a manifold, a turbo, a Bosch bypass valve, and some hardware and plumbing. 5-7 psi. I emailed VAC about this just yesterday and Chris seems to think they can come close, but they'd need a customer car to experiment with. Anyone?

[SimplyDope]

I wouldn't mind dropping my car off on the other side of the border for testing :D

[Ryann]

Shyah. Just a short jaunt over to PA. A company like VAC that has the resources ought to pick up a cheap 318i and develop a kit imo. There are a lot of e36 guys interested in this as well.

[immajackuup]

Shyah. Just a short jaunt over to PA. A company like VAC that has the resources ought to pick up a cheap 318i and develop a kit imo. There are a lot of e36 guys interested in this as well.

sweet,tired of civic and tegs picking on me.

[Midnighttuning]

Here is a 15psi run I did in my e36 M42
I was going to put out a kit w/tune for the e30 and all for 12psi , but I have been side tracked with other projects

If people show enough interest I would be willing to set-up a kit w/tune for 10 to 12psi, stock internals, draw threw AFM , 42LB injectors, 2.5 exhaust, T3/T4 hybrid turbo

I can tell you however that you can easily piece together your own kits for under $1500

Here is my turbo M42 \/

http://www.youtube.com/watch?v=M38uEQetPKU

http://www.youtube.com/watch?v=tN-mR6P0MWc

Best Regards|

[thebutcher37]

I can tell you however that you can easily piece together your own kits for under $1500
Best Regards|

PM me some info.. i would like to know about that.