just did a mishimoto swap on my m42 and i was wondering if anyone can tell me any proper bleeding techniques?
Announcement
Collapse
No announcement yet.
mishimoto swap
Collapse
X
-
heater full bore open bleeder screwsigpic"If one does not fail at times, then one has not challenged himself." -Ferdinand Porsche
The ugly car: http://www.r3vlimited.com/board/showthread.php?t=209713
Comment
-
If it doesn't want to bleed, park on a hill so that the front of the car is higher than the back, and bleed it that way. If it still doesn't want to go, fill the radiator tank with the bleed screw open, parked on the hill, and fill until water is coming out of the bleeder which will pretty much be all the way to the brim, and then bleed it. You'll have to remove some coolant when you're done if you use this approach though.
Comment
-
Originally posted by gearheadE30 View PostIf it doesn't want to bleed, park on a hill so that the front of the car is higher than the back, and bleed it that way. If it still doesn't want to go, fill the radiator tank with the bleed screw open, parked on the hill, and fill until water is coming out of the bleeder which will pretty much be all the way to the brim, and then bleed it. You'll have to remove some coolant when you're done if you use this approach though.
Comment
-
No bleeder screw on a mishimoto but where is your reservoir?IG: deniso_nsi Leave me feedback here
Comment
Comment