Announcement

Collapse
No announcement yet.

Shooting Fire

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Reconnect that O2 sensor man. I promise that the car will run a LOT better when you do.

    Transaction Feedback: LINK

    Comment


      #17
      op is constantly running in open loop?

      Turbo M42 Build Thread :Here
      Ig:ryno_pzk
      I like the tuna here.
      Originally posted by lambo
      Buttchug. The official poster child of r3v.

      Comment


        #18
        Originally posted by Eric View Post
        Sounds like the problem is behind the steering wheel.
        Also a true statement.

        Comment


          #19
          Originally posted by bmwman91 View Post
          Reconnect that O2 sensor man. I promise that the car will run a LOT better when you do.
          Picked up one today at a local auto parts store. 100 Euros... FML Put it in still chasing idle and car running about the same havent noticed anything else. Took it for a drive through some twisty German roads through the mountains and the car is just so much fun. Its weird the car runs fantastic in the higher RPM's and just lumps around in the lowers.

          Comment


            #20
            Sounds like a dirty idle control valve and a vacuum leak. Also try resetting the DME. It has learned all sorts of bad corrections as a result of the sensor being snipped.
            Last edited by bmwman91; 06-16-2013, 01:05 PM.

            Transaction Feedback: LINK

            Comment


              #21
              My no-cat free-flow-muffler m42 would do this occasionally. Although not nearly like that.

              S54B32 swap in progress. Status: Getting There

              Comment


                #22
                Originally posted by dannyyisntt View Post
                your car shoots flames because racecar
                +1
                leave me some feedback if you've bought from me or I've bought your stuff!!
                http://www.r3vlimited.com/board/show...09#post3438509

                Comment

                Working...
                X