M42 won't start

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kencopperwheat
    King of Kegstands
    • Oct 2003
    • 14396

    #76
    Originally posted by E30 Groupie
    Only when cranking? I can hear my m20 pump when i turn the key to on... ?
    I really don't remember... and mine is several miles away so I can't check :(.
    Originally posted by Gruelius
    and i do not know what bugg brakes are.

    Comment

    • Funkmasta
      R3V OG
      • May 2004
      • 7185

      #77
      4 most common M42 no-starts in my experience

      Ecu
      Crank position sensor
      fuel pump
      intake leak
      Joe Funk -- Portland Oregon
      That Guy.
      03 X5. 3 liter obviously.

      Comment

      • Jordan
        R3V OG
        • Oct 2003
        • 12907

        #78
        I don't recall on M20 cars, but on M42 cars the fuel pump does only run in crank or run.
        Tenured Automotive Service Professional - Avid BMW Enthusiast

        Vapor Honing & E30 ABS Pump Refurbishment Service
        https://mtechniqueabs.com/

        Comment

        • Funkmasta
          R3V OG
          • May 2004
          • 7185

          #79
          Curt, try to crank it and the pull a plug... see if it's wet. OR have someone crank it and get your nose down by the tail pipe...
          Joe Funk -- Portland Oregon
          That Guy.
          03 X5. 3 liter obviously.

          Comment

          • Van Westervelt
            R3V OG
            • May 2006
            • 9365

            #80
            Crank
            sigpic

            Comment

            • kencopperwheat
              King of Kegstands
              • Oct 2003
              • 14396

              #81
              UPDATE:

              Pulled the head tonight. Everything looked fine. Is there place I should look for warpage? Will it be obvious? The head looked perfectly straight. Bit of build-up on the cylinders, but that's 280k for ya.

              Head is going to be pressure tested before it's reinstalled.
              Last edited by KenC; 10-17-2007, 07:38 AM.
              Originally posted by Gruelius
              and i do not know what bugg brakes are.

              Comment

              • Joe318is
                R3V OG
                • Sep 2005
                • 6451

                #82
                So? what have you found?


                Originally posted by vlad
                Do you know anybody else who built that many bad ass E30s?

                Comment

                • kencopperwheat
                  King of Kegstands
                  • Oct 2003
                  • 14396

                  #83
                  Head still hasn't been pressure tested. We need to remove the cams first. The plan is to remove them today or tomorrow and then have it tested. If it checks out alright, we'll slap the cams back in and remount them head on Wednesday. If it compression tests OK after that we're going to remount everything and try and fire it up. A long work schedule and not having the car near me has made this a slow process.
                  Originally posted by Gruelius
                  and i do not know what bugg brakes are.

                  Comment

                  • M42Technik
                    R3V OG
                    • Dec 2003
                    • 9781

                    #84
                    M50 swap. ;)
                    Reminiscing...

                    Comment

                    • 318ls
                      Noobie
                      • Oct 2007
                      • 2

                      #85
                      My M42 didn't start as well 3 weeks ago. After going through all sensors, I did find out the CPS have gone hell. Do a simple check with your DMM, it should read about 560 Ohm or so. Mine actually read over 1500kOhm...

                      Comment

                      • kencopperwheat
                        King of Kegstands
                        • Oct 2003
                        • 14396

                        #86
                        Originally posted by 318ls
                        My M42 didn't start as well 3 weeks ago. After going through all sensors, I did find out the CPS have gone hell. Do a simple check with your DMM, it should read about 560 Ohm or so. Mine actually read over 1500kOhm...
                        Both crank and cam sensors read well within spec. I also replaced them with known working ones.
                        Originally posted by Gruelius
                        and i do not know what bugg brakes are.

                        Comment

                        • kencopperwheat
                          King of Kegstands
                          • Oct 2003
                          • 14396

                          #87
                          I should get the diagnosis on the pressure test of the head this afternoon.
                          Originally posted by Gruelius
                          and i do not know what bugg brakes are.

                          Comment

                          • Funkmasta
                            R3V OG
                            • May 2004
                            • 7185

                            #88
                            Aluminum head rebuilders says: exhaust valves not seating, due to carbon buildup. Fairly common with the M42s they said. The flash carbon buildup was probably due to a minor overheat...

                            hmmm
                            Joe Funk -- Portland Oregon
                            That Guy.
                            03 X5. 3 liter obviously.

                            Comment

                            • Simon S
                              No R3VLimiter
                              • Oct 2004
                              • 3758

                              #89
                              update ?

                              .
                              -----Zen and the Art of e30 Maintenance - / - Zen TOC - / - Zen Summary

                              Comment

                              • kencopperwheat
                                King of Kegstands
                                • Oct 2003
                                • 14396

                                #90
                                Originally posted by Simon S
                                update ?

                                .

                                Ran like a champ once the head was popped back on.

                                Now to fix the leak from the thermostat housing :/
                                Originally posted by Gruelius
                                and i do not know what bugg brakes are.

                                Comment

                                Working...