The E32 one will fit the E30 chassis but it is offset (mounting) and wont work correctly, but the e36 center support is much more robust looking at a pic of it, and is in the center of the mounting points. Does anyone know from hearsay or experience a better one than the thin, flimsy ones that you get from say autohausaz? The MTC brand for example.
-
-
bmw dealer supplied center support for driveshafts seem to live the longest; cost is high though in compared to many inexpensive aftermarket.OBD1 M54/M52TU swap as a M50b25
Z4 non powered steering rack fits e30
Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine
-
Plenty of people use the stock E30 one without issues at well above stock power. If yours is continuously failing, it is probably a symptom of another issue, and not the cause.
Also, I think the switch to the offset CSB was 09/1987, or so says RealOEM, so if your car is later than that, you should be looking to keep the offset the same.Originally posted by priapismOriginally posted by shamesonComment
-
I have done the hack approach by using
Weatherstrip adhesive to attach some rubber vacuum hose to the cavity to reinforce it . Hasn't failed yet....
Never argue with stupid people, they will drag you down to their level and beat you with experience. -Mark TwainComment
Comment