Announcement

Collapse
No announcement yet.

1987 325e clutch replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1987 325e clutch replacement

    the cps is on the bellhousing so im under the impression I need a dmf for the sensors to work, any suggestions on what to do would be appreciated

    #2
    General Discussion is not a catch-all; please do not ask technical questions there. If you don't know where to ask your question, post it in General Technical and we'll move it to the appropriate subforum if necessary. Thanks in advance.
    Originally posted by kronus
    would be in depending on tip slant and tube size

    Comment


      #3
      I'm not sure what you are asking. On my 85, there are two speed sensors on the bell housing. I believe on looks for the teeth on the flywheel the other looks for a piece welded to the flywheel. The crank position sensor is on the front of the crank just below the alternator. Are you converting to manual from automatic?
      2004 525i Manual - 1985 325E Coupe Manual

      Comment


        #4
        Some etas had single mass, with the pins for the flywheel sensors.

        RealOEM can help for part numbers- but I don't know if it's 100% accurate as to which cars ACTUALLY got which flywheel.

        t
        single mass
        now, sometimes I just mess with people. It's more entertaining that way. george graves

        Comment

        Working...
        X