1987 325e clutch replacement

[rlydirty30]

the cps is on the bellhousing so im under the impression I need a dmf for the sensors to work, any suggestions on what to do would be appreciated

[agent]

General Discussion is not a catch-all; please do not ask technical questions there. If you don't know where to ask your question, post it in General Technical and we'll move it to the appropriate subforum if necessary. Thanks in advance.

[tomstin]

I'm not sure what you are asking. On my 85, there are two speed sensors on the bell housing. I believe on looks for the teeth on the flywheel the other looks for a piece welded to the flywheel. The crank position sensor is on the front of the crank just below the alternator. Are you converting to manual from automatic?

[TobyB]

Some etas had single mass, with the pins for the flywheel sensors.

RealOEM can help for part numbers- but I don't know if it's 100% accurate as to which cars ACTUALLY got which flywheel.

t
single mass