E30 S62 Vert

[Jesper K]

Hi all.
Thought i`d share some knowledge on the brakebooster issue.
From my own project.
H31 system from E32 w. ABS








You know it. Euro E30´s rule.

Jesper K.

[DTM190]

Thanks for sharing, a fellow 1uz E30 swapper is using that set up in Netherlands due to the space it offers.

Looking forward to more on the 350i Vert.

p.s I hate you for having S62 :p

[Jonsku]

Yap, that's a good system though needs bit more plumbing.

More pictures of the swap would be nice, will it be up'n'running this summer? :)

[bimmerteck]

Great to know! thanks for posting, I'm starting on the same swap here in a few weeks.

[dude8383]

I'm just here to subscribe to the S62 awesomeness.

[Wh33lhop]

Awesome--any more info on this booster setup? Looks like it uses pressure from the PS pump--did you custom make lines?

Some brief info and a teardown of the H31 booster:

http://bmwe32.masscom.net/maxf_website/h31_breakdown.htm

[Van Westervelt]

This could be crazy useful. Any s## motor in an e30 is slick! Especially one that big!

[Wh33lhop]

Yep, and no crazy remote or boosterless setups or anything. :p

[BruceBe]

Interesting - a few questions:
1) Has anyone successfully installed this system and road-tested it? I'm curious as to the MC diameters/interchangeability.

2) Which PS pump is being used? Conceivably, you could utilize a later tandem vane pump with an ABS port, right?

3) What are the cost-effective donor car options here in the USA?

Thanks for sharing.
-Bruce

[DTM190]

Im trying to find Marcels more comprehensive thread, this is the fellow in Netherlands that has the 2jz with the hydro set up, will keep searching and post up when i find it

http://www.motorswaps.net/forum/showthread.php?t=804

Great guy, and is also building a 1uz E30 like mine

[DTM190]

Here is his thread on e30t3ch http://www.e30tech.com/forum/showthr...t=74338&page=3

Somewhere he has a thread where he goes into more detail about the brakes, on a supra or 2jz forum in netherlands,

Just PM him on e30t3ch, Marcel is a great guy

[Jesper K]

H31 hydrobooster

Hi all
The supply pump seems to be an ordinary P.S.-pump.
The regulator/accumulator unit has an output for the P.S.

Jesper K

[MattAvino]

Bump for updates

[The Dark Side of Will]

Hi all.
Thought i`d share some knowledge on the brakebooster issue.
From my own project.
H31 system from E32 w. ABS



You know it. Euro E30´s rule.

Jesper K.

How much clearance actually is there between the booster and the cylinder head or coil cover? Looks like less than 1" (25mm)...

[Jonsku]

How much clearance actually is there between the booster and the cylinder head or coil cover? Looks like less than 1" (25mm)...

.. which is already enough :)