MMP M62B44 Build Project "Jack-N-Coke"

[MonkeyMadness]

How's this beast doing lately?

Replaced the clutch slave cylinder and now all shifts are smooth an easy.
I replaced the 30 amp fuses with 40 for the fans and have yet to pop one.
Still get some crazy feed back through the speakers (have no clue what that is)
but it doesn't happen all the time...?!?!

Yep... Need new tires in the rear. Regardless if you burn out or not just the torque your putting down will grind them off.

Other than that it's fucking awesome.. Drove it into work today... I have fallen in love with it.....

Next project will be the Supercharger manifold and new seats or seat rebuilds...

[Tjabo]

How's this beast doing lately?

[whitebulat22]

My first read through, and I'll definitely be checking this often 8) Sick dyno numbers. Making me feel good about storing my B40 parts, as long as it may be before it's their time to run.

[MonkeyMadness]

:devil: awesome!! it is mean as fuck
Could not agree more with you!! the looks I got from people when my car still had an engine...lolll..

Quick question found a donor engine this time I'm tearing everything down... and wondering what chemicals I can use to clean the pistons and top of bores?? ...since its a Alusil block dont want to ruin that expensive alu/silicone on those bores..

I haven't entered that realm, but I have been snoopen the Porsche sites and they have the same cylinder walls and rebuild there shit all the time. so check a few out...

Just read all 45 pages! Epic!
I have to keep stopping myself looking up donor cars!

Why stop.... You Must Build...~!

[pirate323i]

Just read all 45 pages! Epic!
I have to keep stopping myself looking up donor cars!

[Denny]

Got clutch slave cylinder leak down, and a few drips from the bell housing.
So that I'll have to replace soon.
also noticed that I have a elc gremlin in the car. Not sure what's up.
Some times I get a whistle through the radio, or I pop a elc fan fuse. But not all the time. just seems to come and go.. Other than that I have had no issues..
to speak of.
The car runs amazingly well. strong, starts every time, mean as fuck....
This car is very aggressive on the street. And that has nothing to do with how I drive. It has presence at alight, just the idle of the v8 in that tiny all car makes people look and wounder...
I have yet to have some one try me at a light, but i did have a lifter truck (gas) try to pull me while going up a hill... Didn't even shift out of 5th for that one...

So far very pleased with it. It's addicting to drive.

:devil: awesome!! it is mean as fuck
Could not agree more with you!! the looks I got from people when my car still had an engine...lolll..

Quick question found a donor engine this time I'm tearing everything down... and wondering what chemicals I can use to clean the pistons and top of bores?? ...since its a Alusil block dont want to ruin that expensive alu/silicone on those bores..

[MonkeyMadness]

Got clutch slave cylinder leak down, and a few drips from the bell housing.
So that I'll have to replace soon.
also noticed that I have a elc gremlin in the car. Not sure what's up.
Some times I get a whistle through the radio, or I pop a elc fan fuse. But not all the time. just seems to come and go.. Other than that I have had no issues..
to speak of.
The car runs amazingly well. strong, starts every time, mean as fuck....
This car is very aggressive on the street. And that has nothing to do with how I drive. It has presence at alight, just the idle of the v8 in that tiny all car makes people look and wounder...
I have yet to have some one try me at a light, but i did have a lifter truck (gas) try to pull me while going up a hill... Didn't even shift out of 5th for that one...

So far very pleased with it. It's addicting to drive.

[MonkeyMadness]

Wellupp Drove the car to work today, it was awesome! Got no vibrations out of the driveline at all... Hoping this is a good fix.

Now if this hold up I will have the time to start my super charger manifold "again"
all attempts so far have been less than perfect. I have another idea and should be ironing out more issues and posting up more detail on that here in the near future. Sadly I quite busy at work and have been on the road, I was able how ever to pick up a sponsor for the Juggernaut "Pirelli tires" but that also mean I now have a completion date that i committed too. This will eat into my time.. ugh

[Denny]

Yep all finished. Just need 3 more bolts 12mm x 1.5 x 58 and 3 matching 12mm x 1.5 locking nuts and I'm burning tires again...


Sent from my SM-N910P using Tapatalk

Awesome man now lets see some burnouts !! my car is done for the year looks like it.... winter is coming over here real fast and wont have another engine in it before :( ... at least I can see yours go and imagine lolll

ahhh well this winter I may bring a big surprise spring 2016:devil:

[MonkeyMadness]

Yep all finished. Just need 3 more bolts 12mm x 1.5 x 58 and 3 matching 12mm x 1.5 locking nuts and I'm burning tires again...


Sent from my SM-N910P using Tapatalk

[MonkeyMadness]

Got the drive shaft and under car completely broken down and awaiting ordered parts.
should all fall back together quite easily.
Can't wait.
Sadly after this weekend I will be working straight for the need 6-8 weeks
which includes a trip to Canada, then Scottsdale, then a Palm Springs before I get some time to myself, not to mention some were in there I will have to fit in a Birthday weekend at Legoland. My little guy is turning 6yrs old...

I may not have it road worthy till the November...ugh

[ForcedFirebird]

The e36 csb doesn't work anyways. Need to install one backwards from an e30.

[Denny]

Thats life i guess...good luck...bad luck...repeat! Happy to hear about this man good find...... M62 e30's keep on living...

[36brua]

Ah life is good now !!
change guibo and go

[MonkeyMadness]

Score!
Snagged an fresh e36 328i manual driveshaft out side of Glendora. 3hr round trip. Ujoints feel nice and smooth
So does the csb but it also rocks fore and aft so i will be replacing that.



Sent from my SM-N910P using Tapatalk