MMP M62B44 Build Project "Jack-N-Coke"

[MonkeyMadness]

Lol I know. Its not the options that are a problem. I was just thinking of killing two birds with one v8....

[The Dark Side of Will]

The O2 sensor that the DME uses for mixture control should be as close as possible to the exhaust valves while still receiving exhaust gas from all the cylinders on that feedback loop.

The post-cat O2 sensor, if you use one, needs to be close enough to the catalyst outlet to stay hot.

[Denny]

;D

The O2 sensor that the DME uses for mixture control should be as close as possible to the exhaust valves while still receiving exhaust gas from all the cylinders on that feedback loop.

The post-cat O2 sensor, if you use one, needs to be close enough to the catalyst outlet to stay hot.

and IF you go Megasquirt you use 1 Wideband and call it a day :)

[Jean]

Lucky you guys not in CA, you have no options on what CATS to use lol .

[The Dark Side of Will]

and IF you go Megasquirt you use 1 Wideband and call it a day :)

As long as it sees exhaust from all 8 cylinders...

[MonkeyMadness]

[ATTACH]88377[/ATTACH]

[MonkeyMadness]

4 knock sensors enroute.

Had more tach issues. Going in another direction.

Still waiting on building an exhaust. ..

[Denny]

4 knock sensors enroute.

Had more tach issues. Going in another direction.

Still waiting on building an exhaust. ..

Man should of asked...I could of given you the knock sensors out of my motor for free :) +shipping

Any progress on the tach and exhaust?

[MonkeyMadness]

Man should of asked...I could of given you the knock sensors out of my motor for free :) +shipping

Any progress on the tach and exhaust?

Well damn that would have been nice. Except I have that one year harness with the 3 prong knock sensor...ugh

The exhaust I have kinda stalled on life keeps getting in the way.... (shaking my fist at the Gods)

The tach is proving to be more of an issue than expected.
I was able to mount the Garagetastic unit and get it working. Then in thw process of srinkrapping it and tucking it I killed it...ugh

So I bought a Dakota Digital tach thingly.
It seems much more robust.
To which I have also not installed yet do to life once again getting in the way....ugh

[Denny]

4 knock sensors enroute.

Had more tach issues. Going in another direction.

Still waiting on building an exhaust. ..

Well damn that would have been nice. Except I have that one year harness with the 3 prong knock sensor...ugh

The exhaust I have kinda stalled on life keeps getting in the way.... (shaking my fist at the Gods)

The tack is proving to be more of an issue than expected.
I was able to mount the Garagetastic unit and get it working. Then in thw process of srinkrapping it and tucking it I killed it...ugh

So I bought a Dakota Digital tack thingly.
It seems much more robust.
To which I have also not installed yet do to life once again getting in the way....ugh

I got the same garagistic RPM thing waiting for install and It also going in a 318 (which already has the 4 banger chip) hope I will have a bit more luck with it...If not at least I know there are other options.

Cant wait to see your plans for the new exhaust.. I cant wait to get to that section of the swap.. all the stress from "will this car start???" is gone...the rest Should be fun

oh trust me I get the life keeps getting in the way my man... I soooo get it!! family..wife...kids... work..this and that.. seem like there is always something. that's why my swaps always take place in the winter months.. at least I dont have the outside of the house to take care of gives me more "ME" time in the garage...

[Zacm829]

Man should of asked...I could of given you the knock sensors out of my motor for free :) +shipping

Any progress on the tach and exhaust?

Is this offer open to anyone? I'm in need of some m60 knock sensors to get my engine running. Sending PM.

[Chris916]

Well damn that would have been nice. Except I have that one year harness with the 3 prong knock sensor...ugh

The exhaust I have kinda stalled on life keeps getting in the way.... (shaking my fist at the Gods)

The tach is proving to be more of an issue than expected.
I was able to mount the Garagetastic unit and get it working. Then in thw process of srinkrapping it and tucking it I killed it...ugh

So I bought a Dakota Digital tach thingly.
It seems much more robust.
To which I have also not installed yet do to life once again getting in the way....ugh

That's too bad about the Garagistic tach issues. I got the same one, installed about a week ago and everything works great.

[MonkeyMadness]

It think is was cause I was trying too hard to hide it or make it "perfect" and I just screwed up. Either the heat busted it or the shrinkrap did something either way it was my fault.

[MonkeyMadness]

OKay... So if you have read and followed my build thread you know that when it comes to rare, hard to find, cool, and just neet stuff I'm kinda of and impulse buyer.
Well look like i did it again. So i surfing around creepin on the German used auto parts sites and blogs looking for shit i don't need but strangely must have. it's getting late the wife and kid have passed out next to me..
When I jump back to R3v to troll alittle and skim the used parts threads when I see it...Holy fuck did I see it! Right there in the for sale thread fire sale S62 parts!

So i walked away with.... ;)

[The Dark Side of Will]

You realize those will need adapter plates to bolt up to your heads, right?