Denny's M62B44 swap (MS2 installed First start VIDEO inside)
				
					Collapse
				
			
		
	X
- 
	
	
	
	
 
 that build thread is not actuall... I am preparing huge comeback ;D many of interesting parts are bought. nowadays i am waiting for one time and than BOOOM all news you will see there :)
 
 PEACE and thank you for your opinnion. I am big fan of nice and clean builds;)Leave a comment:
- 
	
	
	
	
 How clean is the build?
 
 Lot of guy here just throw v8's at there cars hoping it will stick and runum
 Some of us like a nice clean build.. I would love to see how you dealt with some of the issues of the retention of all the obd2, vanos and esw ect, of your build.
 Do you have a build thread here was can view?
 I maybe looking at doing another car here in the next year.Leave a comment:
- 
	
	
	
	
 
- 
	
	
	
	
 So you kept the drive by wire throttle, the VANOS control, the EWS with key antenna, and everything? Are you happy with it?
 
 Since the OP is running MegaSquirt, I think he could use a m62tu and just run the VANOS from the MegaSquirt. Of course then there is the added trouble of the fragile timing chain guides...Leave a comment:
- 
	
	
	
	
 Leave a comment:
- 
	
	
	
	
 
- 
	
	
	
	
 
- 
	
	
	
	
 VANOS and drive by wire throttle are two of the problems with it in my book. I guess maybe if you're swapping in a factory DME with the appropriate EWS and ring antenna it could be ok... What a pain that would be though. HahaLeave a comment:
- 
	
	
	
	
 
- 
	
	
	
	
 Well i found the problem.... 
 
 Rod bearing piston 2 and 6 destroyed and fused together was a bitch to remove...crank is garbage but lucky mains are ok.... So i'm getting another engine tomorrow.... Now how this happened i got no f*cking clue...Leave a comment:
- 
	
	
	
	
 Cool thanks ... Happy it swaps cause since no way am skipping on changing rails and head gasket on next build and vanos cars are available and cheap cause...vanos lollLeave a comment:
- 
	
	
	
	
 Yes the short block will swap.
 Front covers and heads will need to be swapped.
 
 Sent from my SM-N910P using TapatalkLeave a comment:

Leave a comment: