My new m62! bringing this thread back from the grave

[The Dark Side of Will]

It has fuel pressure it runs perfect without the sensor plugged in

Sent from my MotoG3 using Tapatalk

I would *guess* that your sensor timing is off. Have you verified that you wired the coils in the correct firing order?

[dougie30]

I would *guess* that your sensor timing is off. Have you verified that you wired the coils in the correct firing order?

yea thats my point. the cam sensor timing is off. I was told a few posts back that the cam trigger should be in front of the sensor while the crank sensor was in the large gap of the trigger wheel, which is wrong.

so like i said the motor runs perfect without the cam sensor plugged in, hence the incorrect trigger wheel location.

[dougie30]

found trigger wheel to be exactly 180 out, motor runs properly now.

[AudioNToxication]

noice

[dougie30]

Anyone know if it is safe to dive a m62 with the 404 ECU not being chipped??

Sent from my MotoG3 using Tapatalk

[jpod999]

Should be safe, just not ideal as far as I know.

[dougie30]

Should be safe, just not ideal as far as I know.

Ok just didn't know if it would run to lean or something

Sent from my MotoG3 using Tapatalk