Project: Spielereien. AKA "The dumpster fire"

[delamaize]

good update! congrats on the liquid encouragement. At least you bought parts, and not cars. that rarely turns out well

Yeah, Garagistic got a pretty good chunk of change from me. Bunch of stuff I needed for the swap, or for other projects. Picked up rear camber/toe kit, Billet throttle cable bushings for M60, Exhaust manifolds for the M60 swap, Engine mounts, sub frame spacers, tranny mount extension, drive shaft, Tach splitter, Fan, Drop hats, and a P/S block off block. Then I called and left a message at UUC, I'm pretty sure I sounded really drunk, but they still called me back. After my conversation with them I bought one of their "medium weight" flywheels and clutch kits. Shit's getting really real. I'll post pictures when the parts get here.

It will probably be this fall before I actually start assembling the whole thing. I still have some parts I want to find and build, and we need to get my buddies Aristo swapped IS300 running first.

[lemansguy]

good update! congrats on the liquid encouragement. At least you bought parts, and not cars. that rarely turns out well

[delamaize]

Drunk M60 swap parts spree!!

So I'm not going to lie, I had too much to drink tonight. I had been back and forth on buying some of the needed swap parts for a while now, and the liquid encouragement, and my buddy maston convened me to just pull the damn trigger. I got a care package from Garagistic.com coming soon.....

....still drunk btw.....

[delamaize]

Update:
House with a Garage acquired. First car in the Garage is my buddy's IS300 with a partially finished Aristo swap, then, Probably after the picnic, then Spielereien goes in the Garage, and they Mayhem starts.

[straight6pwr]

yes you can use m62 flywheel/clutch on the m60.
make sure you match the clutch and the flywheel, as the m60 stuff is a different diameter. (larger)

there are no single mass setups besides going with performance lightweight stuff.

[delamaize]

Here comes a dumb question!

M60 and M62 flywheels, Are they interchangeable?
I'm trying to locate a flywheel and clutch for my swap, and I have the opportunity to buy the set that was attached to the M62 that I got my 420g from. I don't want to go back to the dual mass, but it looks like I am going to have no choice, unless I come to a point where I can drop $2k on a set up.

Also, is there any other flywheel/clutch combinations that will work with the M60/420g?

[straight6pwr]

from my research the orange dealer sticker was a service bulletin software update that they did to cars that were brought in for service, much like a recall. i've had 4 e34 404 dmes in my hands and two had the sticker and two did not. shouldnt make a difference, either way.

[delamaize]

DME showed up today, it has one of those orange BMW Service action stickers on it, not sure if thats a good thing or not, guess we will find out later....

[delamaize]

From what I understand, the 0261200404 is OBD1. Unless I am completely off base.

[CMart]

Does the 404 DME require an OBDI conversion?

[delamaize]

This thing will be such a sleeper with that motor in it. It was nice meeting you at that Dicks gtg.

Likewise man! Besides the fact that I think the shitty paint gives is part of it's personality, I also think the sleeper factor is going to be worth while. I can't wait to see the look on the first person's face I lay to waste with Spielereien.

(for those of you who have not figured it out, Spielereien, is Shenanigans in german. ;D)

[2mAn]

This thing will be such a sleeper with that motor in it. It was nice meeting you at that Dicks gtg.

[delamaize]

Picked up the 420g today...

Also scored a 404 ecu for about $30 shipped. Will be here in a few days

[slammin.e28]

With proper sized masters it's fine.....can be even better.

[delamaize]

Saw your Q about the ABS stuff in another thread.

Simple answer.....don't use the stupid remote brake booster....do the Wilwood thing. Then everything can stay where it is....ABS, etc. Just run two lines to the master cylinders and done.

I'm thinking about it now, not sure how the pedal feel is without the booster though....