regular old m60 swap

[marshallnoise]

Any busted lights or door switches?

Sent from my XT1575 using Tapatalk

[dothadance]

As soon as I unplug my ecu it drops to 45 ma

[dothadance]

151 milliamp drain. And my ecu is all wet.

[jpod999]

Good luck finding it!

[dothadance]

without having done any troubleshooting i have a couple hunches as to where my drain is. gonna check it out tomorrow.

[dothadance]

no cars and coffee lol. decided to wait for my paycheck rather than put it on the ol credit card, not to mention how burnt out i was from working non stop. so the next thing up is to reseal that rear coolant crossover pipe and to change the ecu temp sensor and swap the m20 gauge sensor on there. just want to double check with the og's on here to make sure i dont have to do this twice as well as document it for others to find.



#8 is for the cluster that i will be replacing with the brown top m20 sensor. and the wires for the plug may need to be switched as the m20 sensor is only one pol.
and
#10 is for the ecu, which i will just be replacing with a fresh unit. lol... unit.

Edit: just went up to my car and unlocked the trunk, doors didn't budge and no trunk lights. battery's at 2.56 volts lmao. had a fully charged battery no more than a week ago, and started it up at the same time. guess i gotta find this power draw too,

[dothadance]

saturday came and went. unfortunately i wasn't able to get it running, partially due to my friends being unable to come over and help weld my exhaust and partially from parts availability at any stores. now i'm shooting for cars n coffee this weekends, we'll see if that happens tho because i had to return my friends welder and i have like 2 feet left of exhaust to connect right around the driver side o2 area. maybe i'll just go open header...
lol...

[dothadance]

I don't use paper gaskets. They rely on impeccable surface prep. I like RTV. [emoji12]

Sent from my XT1575 using Tapatalk

Gonna give that a shot then. Trying to get this bitch running by Saturday.

[marshallnoise]

I could've sworn that they're new, but I honestly can't remember it's been so long

I don't use paper gaskets. They rely on impeccable surface prep. I like RTV. [emoji12]

Sent from my XT1575 using Tapatalk

[dothadance]

New gaskets or no?

I could've sworn that they're new, but I honestly can't remember it's been so long

[jpod999]

That being said, i have a river of coolant coming out of the driver side coolant crossover.

New gaskets or no?

[dothadance]

That being said, i have a river of coolant coming out of the driver side coolant crossover.

[dothadance]

Just backed it out and parked in a new spot . [emoji41] [emoji41] she died twice, but she moved on her own.

[dothadance]

I'm honestly surprised you were able to keep it going long enough to damn near finish a 32v swap!

Lmao I know. I can't help but laugh.

[jpod999]

Fuck me, I've been caught! We got new management so we have all new workers, and some maintenance guy came up and saw us welding stuff with my car on jack stands and snitched on me! [emoji35] [emoji35] [emoji35] [emoji35] Leasing office just called me and said I'm in violation of my lease (lol) and I have 48 hours to move my car or it will be towed. Good thing it kind of runs and I planned on having it done this week anyway [emoji41] [emoji41] [emoji41]

I'm honestly surprised you were able to keep it going long enough to damn near finish a 32v swap!