e30 5.0 turbo (Drift project)

[danval]

First of all, THANK YOU VERY MUCH to all you guys who helped me with my "stupid" questions and some other not so stupid, but anyway. Thank you guys and thank r3evlimited for the platform. The car is 90% done and im taking care of small adjustments and gremlins. Here it goes

[danval]

more

[danval]

[danval]

[danval]

https://www.youtube.com/watch?v=-ErpDnDEt4Y

idle sound

[e30_302]

Rad. Hope you have something to control oil starvation.

[jalopi]

there's a turbo manifold that'll fit much better than what you currently have going on

http://www.r3vlimited.com/board/showthread.php?t=338536

also, i hope you have access to some extra t5's, no way i see that ending well :)

[danval]

Rad. Hope you have something to control oil starvation.

Thanks. I got some baffles going on around the pickup

[danval]

there's a turbo manifold that'll fit much better than what you currently have going on

http://www.r3vlimited.com/board/showthread.php?t=338536

also, i hope you have access to some extra t5's, no way i see that ending well :)

Thanks, I fabricated my own motor mounts so I'm not sure if other stuff will clear that area. I will Fab my own headers down the road anyway. Hahahhah I know! I have my setup to max at 10psi, but with 5 I've been getting plenty of torque to slide the crap out of this coke can! Thanks brotha!

[jalopi]

just make sure to keep it under 6k rpms, from what i've read on all the ford forums that seems to be the magic ticket to keeping stock blocks from splitting when boosted

[danval]

just make sure to keep it under 6k rpms, from what i've read on all the ford forums that seems to be the magic ticket to keeping stock blocks from splitting when boosted

Dang! Good advise!

[e30_302]

Thanks. I got some baffles going on around the pickup

I'd add an Accusump too.

[TRAK WDW]

I'd add an Accusump too.

This x100

Nice build!

[danval]

[danval]

I'd add an Accusump too.

ill look into that! gotta finish some other stuff first. lol