M60B44,MS2,S62 ITB build

[Jack89i]

well, the title says it all. Ive had my m60 5 speed swap for almost two years now and its time for more powa! heres by m60 build thread:http://www.r3vlimited.com/board/showthread.php?t=308273
M60 will be coming out this winter, still haven't decided if it will be more cost effective to use the parts from my current m60 or sell the swap as a whole and get everything I need from the junkyard

[Jack89i]

Picked up an m62 and 6 speed for a steal

S62 parts came in



Sent from my iPhone using Tapatalk

[325est13psi]

interested in seeing the adapter... from what ive read, the itbs dont just bolt on

[BenzoNI]

well, the title says it all. Ive had my m60 5 speed swap for almost two years now and its time for more powa! heres by m60 build thread:http://www.r3vlimited.com/board/showthread.php?t=308273

M60 will be coming out this winter, still haven't decided if it will be more cost effective to use the parts from my current m60 or sell the swap as a whole and get everything I need from the junkyard

Interesting, how far along are you with it all?

Are you planning to run fly by wire or with a cable actuated throttle?

Where have you sourced adaptor plates for the throttle body conversion? I got mine from Sweden, they mount up nicely but I've yet to fire the car up on them.

Keep us updated with your progress.

[goarmy]

nice project!! itb's will be interesting to see:devil:

[Jack89i]

Interesting, how far along are you with it all?

Are you planning to run fly by wire or with a cable actuated throttle?

Where have you sourced adaptor plates for the throttle body conversion? I got mine from Sweden, they mount up nicely but I've yet to fire the car up on them.

Keep us updated with your progress.

Im still just collecting parts and tearing the m62 down
Im planning on using a cable actuated setup. I don't have adapter plates yet, Im trying to find where I can buy them or ill end up having them made.

[BenzoNI]

Im still just collecting parts and tearing the m62 down

Im planning on using a cable actuated setup. I don't have adapter plates yet, Im trying to find where I can buy them or ill end up having them made.

I can send you a full kit, my friend makes them.

[Jack89i]

I can send you a full kit, my friend makes them.

PM sent!

[Jack89i]

Started tearing this bitch down, she is cleean!





Sent from my iPhone using Tapatalk

[Alpina]

Nice !!!!!!!!

[Jack89i]

Update: the Jesus bolt had been kicking my ass for about 2 weeks but I finally got it off after bending a crow bar and several bolts. Ended up having to put a flex plate on putting a floor jack handle between some bolts to lock the crank..Heads are off!






Sent from my iPhone using Tapatalk

[BenzoNI]

Are you planning to do a full 'how to' create an M60B44?

[Jony]

wow, its m62TU :) nice thread sub´d...

[dude8383]

Sub'd.

I want to do a V8 build in the worst way...

[dougie30]

Interested in a full m60 b44 how too

Sent from my LGLS740 using Tapatalk